2016 Ford Taurus Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Ford Taurus, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2016 Taurus — Year-Specific Fitment Context
The 2016 Ford Taurus is in year 8 of 11 using the 5x114.3 pattern (2009–2019). Wheels from any 2009–2019 Ford Taurus are cross-compatible with the 2016 model. Across its full production run (1992–2019), the Taurus has also used: 5x108.
Ford Taurus Bolt Pattern by Year
The table below shows how the Taurus's wheel specifications have changed over the years. The 2016 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x108 | 63.4 | 42 |
| 1993 | 5x108 | 63.4 | 42 |
| 1994 | 5x108 | 63.4 | 42 |
| 1995 | 5x108 | 63.4 | 42 |
| 1996 | 5x108 | 63.4 | 42 |
| 1997 | 5x108 | 63.4 | 42 |
| 1998 | 5x108 | 63.4 | 42 |
| 1999 | 5x108 | 63.4 | 42 |
| 2000 | 5x108 | 63.4 | 42 |
| 2001 | 5x108 | 63.4 | 42 |
| 2002 | 5x108 | 63.4 | 42 |
| 2003 | 5x108 | 63.4 | 42 |
| 2004 | 5x108 | 63.4 | 42 |
| 2005 | 5x108 | 63.4 | 42 |
| 2006 | 5x108 | 63.4 | 42 |
| 2007 | 5x108 | 63.4 | 42 |
| 2008 | 5x108 | 63.4 | 42 |
| 2009 | 5x114.3 | 63.4 | 50 |
| 2010 | 5x114.3 | 63.4 | 50 |
| 2011 | 5x114.3 | 63.4 | 50 |
| 2012 | 5x114.3 | 63.4 | 50 |
| 2013 | 5x114.3 | 63.4 | 50 |
| 2014 | 5x114.3 | 63.4 | 50 |
| 2015 | 5x114.3 | 63.4 | 50 |
| ▸ 2016 | 5x114.3 | 63.4 | 50 |
| 2017 | 5x114.3 | 63.4 | 50 |
| 2018 | 5x114.3 | 63.4 | 50 |
| 2019 | 5x114.3 | 63.4 | 39 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2016 Ford Taurus
The 2016 Ford Taurus uses a 5x114.3 bolt pattern with a 63.4mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type—use conical (60-degree) seat lug nuts for aftermarket wheels. Never reuse factory lug nuts with aftermarket wheels unless they share the same seat design. Improper lug nut fitment can lead to wheel detachment.
Historical Fitment Data Reference
In our dataset, Ford Taurus appears from 1992 to 2019 (28 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 11.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ Avoid using wheels from 1992-2008 Taurus models (5x108 pattern) without adapters; they are not compatible.
- ✅ Check inner clearance for aftermarket wheels with offset below 45mm; they may contact struts or suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Ford Taurus — Frequently Asked Questions
What is the bolt pattern for a 2016 Ford Taurus?
The 2016 Ford Taurus uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 50mm.
What other years of Ford Taurus have the same bolt pattern as the 2016?
The Ford Taurus uses the 5x114.3 pattern from 2009 through 2019. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2016 Ford Taurus?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2016 Ford Taurus?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the PCD for a 2016 Ford Taurus?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2016 Taurus, the PCD is 5x114.3.
Do 2016 Ford Tauruss use lug bolts or lug nuts?
The 2016 Taurus requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset