1999 Ford Taurus Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 Ford Taurus, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1999 Taurus — Year-Specific Fitment Context
The 1999 Ford Taurus is in year 8 of 17 using the 5x108 pattern (1992–2008). Wheels from any 1992–2008 Ford Taurus are cross-compatible with the 1999 model. Across its full production run (1992–2019), the Taurus has also used: 5x114.3.
Ford Taurus Bolt Pattern by Year
The table below shows how the Taurus's wheel specifications have changed over the years. The 1999 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x108 | 63.4 | 42 |
| 1993 | 5x108 | 63.4 | 42 |
| 1994 | 5x108 | 63.4 | 42 |
| 1995 | 5x108 | 63.4 | 42 |
| 1996 | 5x108 | 63.4 | 42 |
| 1997 | 5x108 | 63.4 | 42 |
| 1998 | 5x108 | 63.4 | 42 |
| ▸ 1999 | 5x108 | 63.4 | 42 |
| 2000 | 5x108 | 63.4 | 42 |
| 2001 | 5x108 | 63.4 | 42 |
| 2002 | 5x108 | 63.4 | 42 |
| 2003 | 5x108 | 63.4 | 42 |
| 2004 | 5x108 | 63.4 | 42 |
| 2005 | 5x108 | 63.4 | 42 |
| 2006 | 5x108 | 63.4 | 42 |
| 2007 | 5x108 | 63.4 | 42 |
| 2008 | 5x108 | 63.4 | 42 |
| 2009 | 5x114.3 | 63.4 | 50 |
| 2010 | 5x114.3 | 63.4 | 50 |
| 2011 | 5x114.3 | 63.4 | 50 |
| 2012 | 5x114.3 | 63.4 | 50 |
| 2013 | 5x114.3 | 63.4 | 50 |
| 2014 | 5x114.3 | 63.4 | 50 |
| 2015 | 5x114.3 | 63.4 | 50 |
| 2016 | 5x114.3 | 63.4 | 50 |
| 2017 | 5x114.3 | 63.4 | 50 |
| 2018 | 5x114.3 | 63.4 | 50 |
| 2019 | 5x114.3 | 63.4 | 39 |
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 1999 Ford Taurus
The 1999 Ford Taurus uses a 5x108 bolt pattern with a 63.4mm center bore and 42mm offset. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration. The offset is sensitive; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree) to avoid wheel loosening. Verify lug nut length to ensure proper engagement. For safety, re-torque after 50-100 miles. Wheels from 1992-2008 Taurus models are direct fit, but avoid 5x114.3 patterns used in later years.
Historical Fitment Data Reference
In our dataset, Ford Taurus appears from 1992 to 2019 (28 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 11.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-100 ft-lbs after 50-100 miles of driving.
- ✅ Use hub-centric rings if aftermarket wheels have a larger center bore than 63.4mm.
- ✅ Check offset carefully; 42mm is optimal, but 35-48mm may work with fender rolling.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1999 Ford Taurus — Frequently Asked Questions
What is the bolt pattern for a 1999 Ford Taurus?
The 1999 Ford Taurus uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 42mm.
What other years of Ford Taurus have the same bolt pattern as the 1999?
The Ford Taurus uses the 5x108 pattern from 1992 through 2008. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.
What is the factory wheel offset for a 1999 Ford Taurus?
The OEM offset for the 1999 Taurus is typically around 42mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Ford fit my 1999 Taurus?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.
What lug nut size does the 1999 Ford Taurus use?
The 1999 Ford Taurus uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 1999 Ford Taurus?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset