2015 Ford Taurus Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 Ford Taurus, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2015 Taurus — Year-Specific Fitment Context
The 2015 Ford Taurus is in year 7 of 11 using the 5x114.3 pattern (2009–2019). Wheels from any 2009–2019 Ford Taurus are cross-compatible with the 2015 model. Across its full production run (1992–2019), the Taurus has also used: 5x108.
Ford Taurus Bolt Pattern by Year
The table below shows how the Taurus's wheel specifications have changed over the years. The 2015 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x108 | 63.4 | 42 |
| 1993 | 5x108 | 63.4 | 42 |
| 1994 | 5x108 | 63.4 | 42 |
| 1995 | 5x108 | 63.4 | 42 |
| 1996 | 5x108 | 63.4 | 42 |
| 1997 | 5x108 | 63.4 | 42 |
| 1998 | 5x108 | 63.4 | 42 |
| 1999 | 5x108 | 63.4 | 42 |
| 2000 | 5x108 | 63.4 | 42 |
| 2001 | 5x108 | 63.4 | 42 |
| 2002 | 5x108 | 63.4 | 42 |
| 2003 | 5x108 | 63.4 | 42 |
| 2004 | 5x108 | 63.4 | 42 |
| 2005 | 5x108 | 63.4 | 42 |
| 2006 | 5x108 | 63.4 | 42 |
| 2007 | 5x108 | 63.4 | 42 |
| 2008 | 5x108 | 63.4 | 42 |
| 2009 | 5x114.3 | 63.4 | 50 |
| 2010 | 5x114.3 | 63.4 | 50 |
| 2011 | 5x114.3 | 63.4 | 50 |
| 2012 | 5x114.3 | 63.4 | 50 |
| 2013 | 5x114.3 | 63.4 | 50 |
| 2014 | 5x114.3 | 63.4 | 50 |
| ▸ 2015 | 5x114.3 | 63.4 | 50 |
| 2016 | 5x114.3 | 63.4 | 50 |
| 2017 | 5x114.3 | 63.4 | 50 |
| 2018 | 5x114.3 | 63.4 | 50 |
| 2019 | 5x114.3 | 63.4 | 39 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2015 Ford Taurus
The 2015 Ford Taurus uses a 5x114.3 bolt pattern with a 63.4mm center bore. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree). Improper lug nuts can lead to wheel loosening. Verify wheel load rating meets Taurus specifications. For optimal fitment, select wheels from 2009–2019 Taurus models, which share the same bolt pattern and bore.
Historical Fitment Data Reference
In our dataset, Ford Taurus appears from 1992 to 2019 (28 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 11.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lb after 50 miles of driving.
- ✅ Avoid wheels with offset below 45mm to prevent fender rubbing.
- ✅ Use hub-centric rings with a 63.4mm inner diameter for aftermarket wheels.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2015 Ford Taurus — Frequently Asked Questions
What is the bolt pattern for a 2015 Ford Taurus?
The 2015 Ford Taurus uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 50mm.
What other years of Ford Taurus have the same bolt pattern as the 2015?
The Ford Taurus uses the 5x114.3 pattern from 2009 through 2019. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.
Why is matching the 63.4mm center bore important for the 2015 Taurus?
The 63.4mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2015 Ford Taurus?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2015 Ford Taurus?
The factory center bore (hub bore) for the 2015 Ford Taurus is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2015 Ford Taurus?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2015 Taurus, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset