2019 Ford Taurus Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Ford Taurus, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 1/2 20 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 39 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 Taurus — Year-Specific Fitment Context
The 2019 model year is the final year of the Ford Taurus's 5x114.3 bolt pattern run (since 2009). Wheels from any 2009–2019 Ford Taurus are cross-compatible with the 2019 model. Across its full production run (1992–2019), the Taurus has also used: 5x108.
Ford Taurus Bolt Pattern by Year
The table below shows how the Taurus's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x108 | 63.4 | 42 |
| 1993 | 5x108 | 63.4 | 42 |
| 1994 | 5x108 | 63.4 | 42 |
| 1995 | 5x108 | 63.4 | 42 |
| 1996 | 5x108 | 63.4 | 42 |
| 1997 | 5x108 | 63.4 | 42 |
| 1998 | 5x108 | 63.4 | 42 |
| 1999 | 5x108 | 63.4 | 42 |
| 2000 | 5x108 | 63.4 | 42 |
| 2001 | 5x108 | 63.4 | 42 |
| 2002 | 5x108 | 63.4 | 42 |
| 2003 | 5x108 | 63.4 | 42 |
| 2004 | 5x108 | 63.4 | 42 |
| 2005 | 5x108 | 63.4 | 42 |
| 2006 | 5x108 | 63.4 | 42 |
| 2007 | 5x108 | 63.4 | 42 |
| 2008 | 5x108 | 63.4 | 42 |
| 2009 | 5x114.3 | 63.4 | 50 |
| 2010 | 5x114.3 | 63.4 | 50 |
| 2011 | 5x114.3 | 63.4 | 50 |
| 2012 | 5x114.3 | 63.4 | 50 |
| 2013 | 5x114.3 | 63.4 | 50 |
| 2014 | 5x114.3 | 63.4 | 50 |
| 2015 | 5x114.3 | 63.4 | 50 |
| 2016 | 5x114.3 | 63.4 | 50 |
| 2017 | 5x114.3 | 63.4 | 50 |
| 2018 | 5x114.3 | 63.4 | 50 |
| ▸ 2019 | 5x114.3 | 63.4 | 39 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 Ford Taurus
For the 2019 Ford Taurus, the correct bolt pattern is 5x114.3, center bore 63.4mm, and offset around 39mm. When selecting aftermarket wheels, hub-centric rings are essential to match the 63.4mm bore, preventing vibrations and ensuring proper load distribution. Offset sensitivity is high; a deviation beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (1/2-20) and seat type—factory wheels use a cone seat. Never mix seat types, as improper seating can lead to wheel detachment. Verify that aftermarket wheels have adequate clearance for brake calipers and suspension components.
Historical Fitment Data Reference
In our dataset, Ford Taurus appears from 1992 to 2019 (28 model years). Across model years, this model appears with 2 bolt patterns (5x108, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 11.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from pre-2009 Taurus models (5x108 bolt pattern) without adapters.
- ✅ Check that aftermarket wheels have a center bore larger than 63.4mm and use hub-centric rings to avoid vibrations.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Ford Taurus — Frequently Asked Questions
What is the bolt pattern for a 2019 Ford Taurus?
The 2019 Ford Taurus uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 39mm.
What other years of Ford Taurus have the same bolt pattern as the 2019?
The Ford Taurus uses the 5x114.3 pattern from 2009 through 2019. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What does 39mm offset mean for the 2019 Taurus?
An offset of 39mm means the wheel's mounting surface is 39mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Ford.
Can I use spacers on my 2019 Ford Taurus?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your 1/2 20 hardware.
Will wheels from another Ford fit my 2019 Taurus?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.
What is the factory wheel offset for a 2019 Ford Taurus?
The OEM offset for the 2019 Taurus is typically around 39mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset