2001 Ford Windstar Passenger Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Ford Windstar Passenger, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2001 Windstar Passenger — Year-Specific Fitment Context
The 2001 Ford Windstar Passenger is in year 7 of 9 using the 5x108 pattern (1995–2003). Wheels from any 1995–2003 Ford Windstar Passenger are cross-compatible with the 2001 model.
Ford Windstar Passenger Bolt Pattern by Year
The table below shows how the Windstar Passenger's wheel specifications have changed over the years. The 2001 model year is highlighted.
Fitment Notes
The 2001 Ford Windstar Passenger has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Ford Windstar Passenger appears from 1995 to 2003 (9 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
2001 Ford Windstar Passenger — Frequently Asked Questions
What is the bolt pattern for a 2001 Ford Windstar Passenger?
The 2001 Ford Windstar Passenger uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45mm.
What other years of Ford Windstar Passenger have the same bolt pattern as the 2001?
The Ford Windstar Passenger uses the 5x108 pattern from 1995 through 2003. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
What is the center bore of a 2001 Ford Windstar Passenger?
The factory center bore (hub bore) for the 2001 Ford Windstar Passenger is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2001 Ford Windstar Passenger?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the factory wheel offset for a 2001 Ford Windstar Passenger?
The OEM offset for the 2001 Windstar Passenger is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2001 Ford Windstar Passengers use lug bolts or lug nuts?
The 2001 Windstar Passenger requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Ford Windstar Passenger is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1995-2003 (9 model years).
- Observed bolt-pattern variants: 1 (5x108).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2001 Ford Windstar Passenger, please report it via our About page contact so we can verify and update this record.