2011 Honda Accord Crosstour Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Honda Accord Crosstour, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 50-55 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2011 Accord Crosstour — Year-Specific Fitment Context
The 2011 model year is the final year of the Honda Accord Crosstour's 5x114.3 bolt pattern run (since 2010). Wheels from any 2010–2011 Honda Accord Crosstour are cross-compatible with the 2011 model.
Honda Accord Crosstour Bolt Pattern by Year
The table below shows how the Accord Crosstour's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2010 | 5x114.3 | 64.1 | 50-55 |
| ▸ 2011 | 5x114.3 | 64.1 | 50-55 |
Fitment Notes
The 2011 Honda Accord Crosstour has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Honda Accord Crosstour appears from 2010 to 2011 (2 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 105.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2011 Honda Accord Crosstour — Frequently Asked Questions
What is the bolt pattern for a 2011 Honda Accord Crosstour?
The 2011 Honda Accord Crosstour uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 50-55mm.
What other years of Honda Accord Crosstour have the same bolt pattern as the 2011?
The Honda Accord Crosstour uses the 5x114.3 pattern from 2010 through 2011. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What lug nut size does the 2011 Honda Accord Crosstour use?
The 2011 Honda Accord Crosstour uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2011 Honda Accord Crosstour?
The OEM offset for the 2011 Accord Crosstour is typically around 50-55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 64.1mm center bore important for the 2011 Accord Crosstour?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2011 Honda Accord Crosstour?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 50-55mm, and a center bore of at least 64.1mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Honda Accord Crosstour is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2010-2011 (2 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 105.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2011 Honda Accord Crosstour, please report it via our About page contact so we can verify and update this record.