2000 Honda S2000 Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Honda S2000, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size N 12x1.50
Center Bore (CB) 64.1 mm
Offset (ET) 55
Torque Specs 80 ft-lbs (108 Nm)

2000 S2000 — Year-Specific Fitment Context

The 2000 model year marks the beginning of the Honda S2000's 5x114.3 bolt pattern era, which continued through 2009 (10 consecutive years). Wheels from any 2000–2009 Honda S2000 are cross-compatible with the 2000 model.

Honda S2000 Bolt Pattern by Year

The table below shows how the S2000's wheel specifications have changed over the years. The 2000 model year is highlighted.

Year Bolt Pattern Center Bore Offset
▸ 2000 5x114.3 64.1 55
2001 5x114.3 64.1 55
2002 5x114.3 64.1 55
2003 5x114.3 64.1 55
2004 5x114.3 64.1 55
2005 5x114.3 64.1 55
2006 5x114.3 64.1 55
2007 5x114.3 64.1 55
2008 5x114.3 64.1 55
2009 5x114.3 64.1 55

Fitment Notes

The 2000 Honda S2000 has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Honda S2000 appears from 2000 to 2009 (10 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

2000 Honda S2000 — Frequently Asked Questions

What is the bolt pattern for a 2000 Honda S2000?

The 2000 Honda S2000 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 55mm.

What other years of Honda S2000 have the same bolt pattern as the 2000?

The Honda S2000 uses the 5x114.3 pattern from 2000 through 2009. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.

What is the factory wheel offset for a 2000 Honda S2000?

The OEM offset for the 2000 S2000 is typically around 55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Do 2000 Honda S2000s use lug bolts or lug nuts?

The 2000 S2000 requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

Will wheels from another Honda fit my 2000 S2000?

Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 64.1mm.

Can I use spacers on my 2000 Honda S2000?

Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Honda S2000 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2000 Honda S2000, please report it via our About page contact so we can verify and update this record.

Honda S2000 By Year

2000 2001 2002 2003 2004 2005 2006 2007 2008 2009

Other Honda Models

Accord Accord Hybrid CR-V CR-V Hybrid Civic Civic Type R Clarity Electric Clarity Fuel Cell Clarity Plug-in Hybrid Element Fit HR-V Insight Odyssey Passport Pilot Prelude Prologue Ridgeline S2000