2003 Honda S2000 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2003 Honda S2000, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 55 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2003 S2000 — Year-Specific Fitment Context
The 2003 Honda S2000 is in year 4 of 10 using the 5x114.3 pattern (2000–2009). Wheels from any 2000–2009 Honda S2000 are cross-compatible with the 2003 model.
Honda S2000 Bolt Pattern by Year
The table below shows how the S2000's wheel specifications have changed over the years. The 2003 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2003 Honda S2000
For your 2003 Honda S2000, the 5x114.3 bolt pattern and 64.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The stock offset is 55mm; deviations beyond ±5mm may cause rubbing or clearance issues with fenders or suspension. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a ball seat, while many aftermarket wheels require a conical (60-degree) seat. Using the wrong seat can lead to wheel loosening. Verify lug nut compatibility before installation.
Historical Fitment Data Reference
In our dataset, Honda S2000 appears from 2000 to 2009 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ If lowering the car, consider wheels with higher offset (e.g., 60mm) to avoid rubbing.
- ✅ Always test fit a wheel before mounting tires; clearance behind the spokes for brake calipers is tight.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2003 Honda S2000 — Frequently Asked Questions
What is the bolt pattern for a 2003 Honda S2000?
The 2003 Honda S2000 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 55mm.
What other years of Honda S2000 have the same bolt pattern as the 2003?
The Honda S2000 uses the 5x114.3 pattern from 2000 through 2009. Wheels from any of these model years are dimensionally compatible with the 2003, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2003 Honda?
The 2003 S2000 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2003 Honda S2000?
The factory center bore (hub bore) for the 2003 Honda S2000 is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Honda fit my 2003 S2000?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 64.1mm.
Can I put aftermarket wheels on my 2003 Honda S2000?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 55mm, and a center bore of at least 64.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset