2008 Honda S2000 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Honda S2000, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 55 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 S2000 — Year-Specific Fitment Context
The 2008 Honda S2000 is in year 9 of 10 using the 5x114.3 pattern (2000–2009). Wheels from any 2000–2009 Honda S2000 are cross-compatible with the 2008 model.
Honda S2000 Bolt Pattern by Year
The table below shows how the S2000's wheel specifications have changed over the years. The 2008 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Honda S2000
For your 2008 Honda S2000, the 5x114.3 bolt pattern and 64.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The stock offset is 55mm; deviations beyond ±5mm may cause rubbing or clearance issues with fenders or suspension. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—conical (60-degree) or ball seat—matching the wheel. Mismatched lug nuts can lead to wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and check offset carefully to maintain safe fitment.
Historical Fitment Data Reference
In our dataset, Honda S2000 appears from 2000 to 2009 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid spacers unless using extended studs; they can alter offset and stress hubs.
- ✅ For aftermarket wheels, confirm the hub bore is at least 64.1mm and use hub-centric rings if larger.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Honda S2000 — Frequently Asked Questions
What is the bolt pattern for a 2008 Honda S2000?
The 2008 Honda S2000 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 55mm.
What other years of Honda S2000 have the same bolt pattern as the 2008?
The Honda S2000 uses the 5x114.3 pattern from 2000 through 2009. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What does 55mm offset mean for the 2008 S2000?
An offset of 55mm means the wheel's mounting surface is 55mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Honda.
Why is matching the 64.1mm center bore important for the 2008 S2000?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How do I measure the bolt pattern on my 2008 Honda?
The 2008 S2000 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2008 Honda S2000?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset