2001 Honda S2000 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Honda S2000, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 55 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2001 S2000 — Year-Specific Fitment Context
The 2001 Honda S2000 is in year 2 of 10 using the 5x114.3 pattern (2000–2009). Wheels from any 2000–2009 Honda S2000 are cross-compatible with the 2001 model.
Honda S2000 Bolt Pattern by Year
The table below shows how the S2000's wheel specifications have changed over the years. The 2001 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2001 Honda S2000
For your 2001 Honda S2000, the 5x114.3 bolt pattern and 64.1mm center bore are critical. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 55mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—the S2000 uses a 60-degree conical seat. Using incorrect lug nuts can lead to wheel detachment. Verify that aftermarket wheels are hub-centric or use rings, and check offset carefully to maintain handling and safety.
Historical Fitment Data Reference
In our dataset, Honda S2000 appears from 2000 to 2009 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 64.1mm bore is specific to Honda.
- ✅ Check inner clearance with 17x8 wheels; offset below 50mm may contact the strut.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Honda S2000 — Frequently Asked Questions
What is the bolt pattern for a 2001 Honda S2000?
The 2001 Honda S2000 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 55mm.
What other years of Honda S2000 have the same bolt pattern as the 2001?
The Honda S2000 uses the 5x114.3 pattern from 2000 through 2009. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2001 Honda S2000?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 55mm, and a center bore of at least 64.1mm (using hub rings if larger).
Why is matching the 64.1mm center bore important for the 2001 S2000?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2001 Honda S2000?
The OEM offset for the 2001 S2000 is typically around 55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2001 Honda?
The 2001 S2000 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset