2019 Hyundai Elantra GT Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Hyundai Elantra GT, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 Elantra GT — Year-Specific Fitment Context
The 2019 Hyundai Elantra GT is in year 5 of 6 using the 5x114.3 pattern (2015–2020). Wheels from any 2015–2020 Hyundai Elantra GT are cross-compatible with the 2019 model.
Hyundai Elantra GT Bolt Pattern by Year
The table below shows how the Elantra GT's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 Hyundai Elantra GT
For the 2019 Hyundai Elantra GT, the bolt pattern is 5x114.3 with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings are mandatory to prevent vibration and ensure proper load distribution. Offset must stay within 35-50mm; deviating can cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a conical (60-degree) seat; aftermarket wheels may require ball or conical seats. Never mix seat types. Re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Hyundai Elantra GT appears from 2015 to 2020 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings (67.1mm ID to wheel bore OD) to avoid vibrations and center the wheel properly.
- ✅ Stick to offset between 35-50mm; lower offsets may rub fenders, higher offsets may contact suspension components.
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles; check for proper conical seat engagement.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Hyundai Elantra GT — Frequently Asked Questions
What is the bolt pattern for a 2019 Hyundai Elantra GT?
The 2019 Hyundai Elantra GT uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Elantra GT have the same bolt pattern as the 2019?
The Hyundai Elantra GT uses the 5x114.3 pattern from 2015 through 2020. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2019 Hyundai Elantra GT?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Hyundai fit my 2019 Elantra GT?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the factory wheel offset for a 2019 Hyundai Elantra GT?
The OEM offset for the 2019 Elantra GT is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2019 Hyundai?
The 2019 Elantra GT uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset