2018 Hyundai Elantra GT Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Hyundai Elantra GT, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2018 Elantra GT — Year-Specific Fitment Context
The 2018 Hyundai Elantra GT is in year 4 of 6 using the 5x114.3 pattern (2015–2020). Wheels from any 2015–2020 Hyundai Elantra GT are cross-compatible with the 2018 model.
Hyundai Elantra GT Bolt Pattern by Year
The table below shows how the Elantra GT's wheel specifications have changed over the years. The 2018 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2018 Hyundai Elantra GT
For your 2018 Hyundai Elantra GT, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibrations and ensure proper load transfer. Offset must stay within 35-50mm; deviations risk rubbing or poor handling. Always use lug nuts with 12x1.5 thread pitch and a conical (60-degree) or ball seat matching your wheel's design. Never mix seat types. Re-torque after 50-100 miles. Wheels from 2015-2020 Elantra GT models are direct fit.
Historical Fitment Data Reference
In our dataset, Hyundai Elantra GT appears from 2015 to 2020 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using universal lug nuts; always match seat type (conical or ball) to your wheel.
- ✅ Check inner clearance with 35mm offset wheels; some aftermarket brakes may require spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Hyundai Elantra GT — Frequently Asked Questions
What is the bolt pattern for a 2018 Hyundai Elantra GT?
The 2018 Hyundai Elantra GT uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Elantra GT have the same bolt pattern as the 2018?
The Hyundai Elantra GT uses the 5x114.3 pattern from 2015 through 2020. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
What is the PCD for a 2018 Hyundai Elantra GT?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2018 Elantra GT, the PCD is 5x114.3.
Do 2018 Hyundai Elantra GTs use lug bolts or lug nuts?
The 2018 Elantra GT requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2018 Hyundai Elantra GT?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2018 Hyundai Elantra GT?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset