2026 Hyundai Ioniq 5 N Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Hyundai Ioniq 5 N is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of Not Applicable, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 79-94 ft-lbs (107-127 Nm).
2026 Hyundai Ioniq 5 N Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | Not Applicable |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 79-94 ft-lbs (107-127 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Ioniq 5 N — Year-Specific Fitment Context
The 2026 model year is the final year of the Hyundai Ioniq 5 N's 5x114.3 bolt pattern run (since 2025). Wheels from any 2025–2026 Hyundai Ioniq 5 N are cross-compatible with the 2026 model.
Hyundai Ioniq 5 N Bolt Pattern by Year
Looking for all generations? View the complete Hyundai Ioniq 5 N (2025–2026) Bolt Pattern & Generation Guide →
The table below shows how the Ioniq 5 N's wheel specifications have changed over the years. The 2026 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2025 | 5x114.3 | 67.1 | Not Applicable |
| ▸ 2026 | 5x114.3 | 67.1 | Not Applicable |
2026 Hyundai Ioniq 5 N Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Hyundai Ioniq 5 N, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2024 Aston Martin DB11 | 67.1 mm (Exact) | 35-45mm | 14x1.5 (Ball) |
| 2008 Aston Martin Vantage | 67.1 mm (Exact) | 50 | B 14x2.00 (Cone) |
| 2010 Dodge Avenger | 67.1 mm (Exact) | 42 | N 12x1.50 (Cone) |
| 2000 Dodge Stratus | 67.1 mm (Exact) | 41 | N 12x1.50 (Cone) |
| 2025 Ferrari 12Cilindri | 67.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2025 Ferrari 296 | 67.1 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2003 Pontiac Grand Prix | 70.3 mm | 70.3mm → 67.1mm |
52 |
| 2002 Toyota 4Runner | 106.1 mm | 106.1mm → 67.1mm |
12 |
| 2015 Aston Martin DB9 | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2016 Aston Martin DB9 GT | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2021 Aston Martin DBS Superleggera | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
| 2025 Aston Martin DBX | 68.1 mm | 68.1mm → 67.1mm |
35-45mm |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 79-94 ft-lbs (107-127 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Hyundai Ioniq 5 N — Frequently Asked Questions
What is the bolt pattern for a 2026 Hyundai Ioniq 5 N?
The 2026 Hyundai Ioniq 5 N uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is Not Applicablemm.
What other years of Hyundai Ioniq 5 N have the same bolt pattern as the 2026?
The Hyundai Ioniq 5 N uses the 5x114.3 pattern from 2025 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the PCD for a 2026 Hyundai Ioniq 5 N?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 Ioniq 5 N, the PCD is 5x114.3.
Will wheels from another Hyundai fit my 2026 Ioniq 5 N?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the center bore of a 2026 Hyundai Ioniq 5 N?
The factory center bore (hub bore) for the 2026 Hyundai Ioniq 5 N is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does Not Applicablemm offset mean for the 2026 Ioniq 5 N?
An offset of Not Applicablemm means the wheel's mounting surface is Not Applicablemm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →