2007 Hyundai Santa Fe Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Hyundai Santa Fe, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2007 Santa Fe — Year-Specific Fitment Context
The 2007 Hyundai Santa Fe is in year 7 of 24 using the 5x114.3 pattern (2001–2024). Wheels from any 2001–2024 Hyundai Santa Fe are cross-compatible with the 2007 model.
Hyundai Santa Fe Bolt Pattern by Year
The table below shows how the Santa Fe's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 5x114.3 | 67.1 | 46 |
| 2002 | 5x114.3 | 67.1 | 46 |
| 2003 | 5x114.3 | 67.1 | 46 |
| 2004 | 5x114.3 | 67.1 | 46 |
| 2005 | 5x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| ▸ 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 41 |
| 2009 | 5x114.3 | 67.1 | 41 |
| 2010 | 5x114.3 | 67.1 | 41 |
| 2011 | 5x114.3 | 67.1 | 41 |
| 2012 | 5x114.3 | 67.1 | 41 |
| 2013 | 5x114.3 | 67.1 | 41 |
| 2014 | 5x114.3 | 67.1 | 46 |
| 2015 | 5x114.3 | 67.1 | 46 |
| 2016 | 5x114.3 | 67.1 | 46 |
| 2017 | 5x114.3 | 67.1 | 46 |
| 2018 | 5x114.3 | 67.1 | 35-50 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
| 2022 | 5x114.3 | 67.1 | 35-50 |
| 2023 | 5x114.3 | 67.1 | 35-50 |
| 2024 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2007 Hyundai Santa Fe
For the 2007 Hyundai Santa Fe, the 5x114.3 bolt pattern is shared across 2001–2024 models, ensuring broad wheel compatibility. However, the 67.1mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset of 46mm is sensitive; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and brakes. Always verify lug nut thread pitch (12x1.50) and seat type—use conical (60-degree) seat lug nuts for aftermarket wheels to avoid loosening. Safety first: improper fitment compromises handling and can lead to wheel detachment.
Historical Fitment Data Reference
In our dataset, Hyundai Santa Fe appears from 2001 to 2024 (24 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using wheels with a center bore larger than 67.1mm without hub-centric rings to prevent vibration.
- ✅ Check inner clearance for offset changes; a lower offset (e.g., 40mm) may rub against the strut or fender.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Hyundai Santa Fe — Frequently Asked Questions
What is the bolt pattern for a 2007 Hyundai Santa Fe?
The 2007 Hyundai Santa Fe uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Hyundai Santa Fe have the same bolt pattern as the 2007?
The Hyundai Santa Fe uses the 5x114.3 pattern from 2001 through 2024. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2007 Hyundai Santa Fe?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 46mm, and a center bore of at least 67.1mm (using hub rings if larger).
What lug nut size does the 2007 Hyundai Santa Fe use?
The 2007 Hyundai Santa Fe uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2007 Hyundai Santa Fe?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Will wheels from another Hyundai fit my 2007 Santa Fe?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset