2013 Hyundai Santa Fe Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Hyundai Santa Fe, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 41 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2013 Santa Fe — Year-Specific Fitment Context
The 2013 Hyundai Santa Fe is in year 13 of 24 using the 5x114.3 pattern (2001–2024). Wheels from any 2001–2024 Hyundai Santa Fe are cross-compatible with the 2013 model.
Hyundai Santa Fe Bolt Pattern by Year
The table below shows how the Santa Fe's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 5x114.3 | 67.1 | 46 |
| 2002 | 5x114.3 | 67.1 | 46 |
| 2003 | 5x114.3 | 67.1 | 46 |
| 2004 | 5x114.3 | 67.1 | 46 |
| 2005 | 5x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 41 |
| 2009 | 5x114.3 | 67.1 | 41 |
| 2010 | 5x114.3 | 67.1 | 41 |
| 2011 | 5x114.3 | 67.1 | 41 |
| 2012 | 5x114.3 | 67.1 | 41 |
| ▸ 2013 | 5x114.3 | 67.1 | 41 |
| 2014 | 5x114.3 | 67.1 | 46 |
| 2015 | 5x114.3 | 67.1 | 46 |
| 2016 | 5x114.3 | 67.1 | 46 |
| 2017 | 5x114.3 | 67.1 | 46 |
| 2018 | 5x114.3 | 67.1 | 35-50 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
| 2022 | 5x114.3 | 67.1 | 35-50 |
| 2023 | 5x114.3 | 67.1 | 35-50 |
| 2024 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2013 Hyundai Santa Fe
For the 2013 Hyundai Santa Fe, the 5x114.3 bolt pattern is shared across 2001–2024 models, ensuring broad compatibility. However, the 67.1mm center bore is critical: aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibration. Offset sensitivity is high; the factory 41mm offset should be maintained within ±5mm to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (cone seat, 60-degree taper). Ball-seat or acorn-seat nuts are unsafe and can cause wheel loss. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Hyundai Santa Fe appears from 2001 to 2024 (24 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80–90 ft-lb after 50–100 miles of driving.
- ✅ Verify aftermarket wheels have a 67.1mm hub bore or use hub-centric rings.
- ✅ Avoid spacers thicker than 5mm without extended studs to maintain thread engagement.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Hyundai Santa Fe — Frequently Asked Questions
What is the bolt pattern for a 2013 Hyundai Santa Fe?
The 2013 Hyundai Santa Fe uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 41mm.
What other years of Hyundai Santa Fe have the same bolt pattern as the 2013?
The Hyundai Santa Fe uses the 5x114.3 pattern from 2001 through 2024. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2013 Hyundai Santa Fe?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Hyundai fit my 2013 Santa Fe?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Why is matching the 67.1mm center bore important for the 2013 Santa Fe?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Do 2013 Hyundai Santa Fes use lug bolts or lug nuts?
The 2013 Santa Fe requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset