2015 Hyundai Santa Fe Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 Hyundai Santa Fe, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2015 Santa Fe — Year-Specific Fitment Context
The 2015 Hyundai Santa Fe is in year 15 of 24 using the 5x114.3 pattern (2001–2024). Wheels from any 2001–2024 Hyundai Santa Fe are cross-compatible with the 2015 model.
Hyundai Santa Fe Bolt Pattern by Year
The table below shows how the Santa Fe's wheel specifications have changed over the years. The 2015 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2001 | 5x114.3 | 67.1 | 46 |
| 2002 | 5x114.3 | 67.1 | 46 |
| 2003 | 5x114.3 | 67.1 | 46 |
| 2004 | 5x114.3 | 67.1 | 46 |
| 2005 | 5x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 41 |
| 2009 | 5x114.3 | 67.1 | 41 |
| 2010 | 5x114.3 | 67.1 | 41 |
| 2011 | 5x114.3 | 67.1 | 41 |
| 2012 | 5x114.3 | 67.1 | 41 |
| 2013 | 5x114.3 | 67.1 | 41 |
| 2014 | 5x114.3 | 67.1 | 46 |
| ▸ 2015 | 5x114.3 | 67.1 | 46 |
| 2016 | 5x114.3 | 67.1 | 46 |
| 2017 | 5x114.3 | 67.1 | 46 |
| 2018 | 5x114.3 | 67.1 | 35-50 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
| 2022 | 5x114.3 | 67.1 | 35-50 |
| 2023 | 5x114.3 | 67.1 | 35-50 |
| 2024 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2015 Hyundai Santa Fe
When selecting aftermarket wheels for your 2015 Hyundai Santa Fe, the 67.1mm center bore is critical. Most aftermarket wheels have a larger bore (73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 46mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a conical (60-degree) seat. Using incorrect lug nuts can cause wheel loosening or damage. Verify that aftermarket wheels are hub-centric or use rings, and check offset carefully for clearance.
Historical Fitment Data Reference
In our dataset, Hyundai Santa Fe appears from 2001 to 2024 (24 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid wheels with offset below 40mm on the front, as they may rub the strut or fender liner.
- ✅ If using aftermarket wheels, always install hub-centric rings to match the 67.1mm center bore.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2015 Hyundai Santa Fe — Frequently Asked Questions
What is the bolt pattern for a 2015 Hyundai Santa Fe?
The 2015 Hyundai Santa Fe uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Hyundai Santa Fe have the same bolt pattern as the 2015?
The Hyundai Santa Fe uses the 5x114.3 pattern from 2001 through 2024. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.
What does 46mm offset mean for the 2015 Santa Fe?
An offset of 46mm means the wheel's mounting surface is 46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
Will wheels from another Hyundai fit my 2015 Santa Fe?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the PCD for a 2015 Hyundai Santa Fe?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2015 Santa Fe, the PCD is 5x114.3.
How do I measure the bolt pattern on my 2015 Hyundai?
The 2015 Santa Fe uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset