2001 Hyundai Santa Fe Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Hyundai Santa Fe, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2001 Santa Fe — Year-Specific Fitment Context
The 2001 model year marks the beginning of the Hyundai Santa Fe's 5x114.3 bolt pattern era, which continued through 2024 (24 consecutive years). Wheels from any 2001–2024 Hyundai Santa Fe are cross-compatible with the 2001 model.
Hyundai Santa Fe Bolt Pattern by Year
The table below shows how the Santa Fe's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2001 | 5x114.3 | 67.1 | 46 |
| 2002 | 5x114.3 | 67.1 | 46 |
| 2003 | 5x114.3 | 67.1 | 46 |
| 2004 | 5x114.3 | 67.1 | 46 |
| 2005 | 5x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 41 |
| 2009 | 5x114.3 | 67.1 | 41 |
| 2010 | 5x114.3 | 67.1 | 41 |
| 2011 | 5x114.3 | 67.1 | 41 |
| 2012 | 5x114.3 | 67.1 | 41 |
| 2013 | 5x114.3 | 67.1 | 41 |
| 2014 | 5x114.3 | 67.1 | 46 |
| 2015 | 5x114.3 | 67.1 | 46 |
| 2016 | 5x114.3 | 67.1 | 46 |
| 2017 | 5x114.3 | 67.1 | 46 |
| 2018 | 5x114.3 | 67.1 | 35-50 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
| 2022 | 5x114.3 | 67.1 | 35-50 |
| 2023 | 5x114.3 | 67.1 | 35-50 |
| 2024 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2001 Hyundai Santa Fe
The 2001 Hyundai Santa Fe uses a 5x114.3 bolt pattern with a 67.1mm center bore and 46mm offset. When selecting aftermarket wheels, hub-centric rings are mandatory to match the 67.1mm bore, preventing vibrations and ensuring proper load distribution. Offset is critical: staying within ±5mm of 46mm avoids rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical 60-degree). Mixing seat types (e.g., ball-seat lug nuts on conical wheels) can cause wheel loosening. Verify that aftermarket wheels have sufficient clearance for brake calipers and suspension components.
Historical Fitment Data Reference
In our dataset, Hyundai Santa Fe appears from 2001 to 2024 (24 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 96.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; vibrations and stress on studs may occur.
- ✅ Check that aftermarket wheels have a center bore ≥67.1mm; if larger, use hub-centric rings to reduce to 67.1mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Hyundai Santa Fe — Frequently Asked Questions
What is the bolt pattern for a 2001 Hyundai Santa Fe?
The 2001 Hyundai Santa Fe uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Hyundai Santa Fe have the same bolt pattern as the 2001?
The Hyundai Santa Fe uses the 5x114.3 pattern from 2001 through 2024. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2001 Hyundai Santa Fe?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 46mm, and a center bore of at least 67.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2001 Hyundai?
The 2001 Santa Fe uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2001 Hyundai Santa Fes use lug bolts or lug nuts?
The 2001 Santa Fe requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2001 Hyundai Santa Fe?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2001 Santa Fe, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset