2005 Hyundai Tucson Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2005 Hyundai Tucson, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2005 Tucson — Year-Specific Fitment Context
The 2005 model year marks the beginning of the Hyundai Tucson's 5x114.3 bolt pattern era, which continued through 2024 (20 consecutive years). Wheels from any 2005–2024 Hyundai Tucson are cross-compatible with the 2005 model.
Hyundai Tucson Bolt Pattern by Year
The table below shows how the Tucson's wheel specifications have changed over the years. The 2005 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2005 | 5x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 46 |
| 2009 | 5x114.3 | 67.1 | 46 |
| 2010 | 5x114.3 | 67.1 | 46 |
| 2011 | 5x114.3 | 67.1 | 46 |
| 2012 | 5x114.3 | 67.1 | 46 |
| 2013 | 5x114.3 | 67.1 | 46 |
| 2014 | 5x114.3 | 67.1 | 51 |
| 2015 | 5x114.3 | 67.1 | 51 |
| 2016 | 5x114.3 | 67.1 | 51 |
| 2017 | 5x114.3 | 67.1 | 51 |
| 2018 | 5x114.3 | 67.1 | 51 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
| 2022 | 5x114.3 | 67.1 | 35-50 |
| 2023 | 5x114.3 | 67.1 | 35-50 |
| 2024 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2005 Hyundai Tucson
For your 2005 Hyundai Tucson, the 5x114.3 bolt pattern is shared across 2005–2024 models, ensuring broad compatibility. However, the 67.1mm center bore is critical: aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. Offset is sensitive; the factory 46mm offset maintains optimal suspension geometry and tire clearance. Deviating more than ±5mm may cause rubbing or handling issues. Always use the correct lug nuts: M12x1.50 thread pitch with a conical (60-degree) seat. Flat or ball-seat nuts can loosen or damage the wheel. Re-torque after 50–100 miles to maintain clamping force.
Historical Fitment Data Reference
In our dataset, Hyundai Tucson appears from 2005 to 2024 (20 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 101.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings (67.1mm ID to aftermarket bore) to avoid steering wheel vibration.
- ✅ Stick to offset 40–50mm; lower offsets risk rubbing on fenders, higher offsets may contact suspension.
- ✅ Re-torque lug nuts to 80–90 ft-lb after 50 miles of driving to ensure proper seating.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2005 Hyundai Tucson — Frequently Asked Questions
What is the bolt pattern for a 2005 Hyundai Tucson?
The 2005 Hyundai Tucson uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Hyundai Tucson have the same bolt pattern as the 2005?
The Hyundai Tucson uses the 5x114.3 pattern from 2005 through 2024. Wheels from any of these model years are dimensionally compatible with the 2005, provided the offset and center bore also match.
Why is matching the 67.1mm center bore important for the 2005 Tucson?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How do I measure the bolt pattern on my 2005 Hyundai?
The 2005 Tucson uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2005 Hyundai Tucson?
The factory center bore (hub bore) for the 2005 Hyundai Tucson is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2005 Hyundai Tucson?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2005 Tucson, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset