2007 Hyundai Tucson Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Hyundai Tucson, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2007 Tucson — Year-Specific Fitment Context
The 2007 Hyundai Tucson is in year 3 of 20 using the 5x114.3 pattern (2005–2024). Wheels from any 2005–2024 Hyundai Tucson are cross-compatible with the 2007 model.
Hyundai Tucson Bolt Pattern by Year
The table below shows how the Tucson's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2005 | 5x114.3 | 67.1 | 46 |
| 2006 | 5x114.3 | 67.1 | 46 |
| ▸ 2007 | 5x114.3 | 67.1 | 46 |
| 2008 | 5x114.3 | 67.1 | 46 |
| 2009 | 5x114.3 | 67.1 | 46 |
| 2010 | 5x114.3 | 67.1 | 46 |
| 2011 | 5x114.3 | 67.1 | 46 |
| 2012 | 5x114.3 | 67.1 | 46 |
| 2013 | 5x114.3 | 67.1 | 46 |
| 2014 | 5x114.3 | 67.1 | 51 |
| 2015 | 5x114.3 | 67.1 | 51 |
| 2016 | 5x114.3 | 67.1 | 51 |
| 2017 | 5x114.3 | 67.1 | 51 |
| 2018 | 5x114.3 | 67.1 | 51 |
| 2019 | 5x114.3 | 67.1 | 35-50 |
| 2020 | 5x114.3 | 67.1 | 35-50 |
| 2021 | 5x114.3 | 67.1 | 35-50 |
| 2022 | 5x114.3 | 67.1 | 35-50 |
| 2023 | 5x114.3 | 67.1 | 35-50 |
| 2024 | 5x114.3 | 67.1 | 35-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2007 Hyundai Tucson
For your 2007 Hyundai Tucson, the bolt pattern is 5x114.3 with a center bore of 67.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree) to avoid wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and check for brake caliper clearance. Proper fitment is critical for safety and performance.
Historical Fitment Data Reference
In our dataset, Hyundai Tucson appears from 2005 to 2024 (20 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 101.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 67.1mm bore is specific and mismatch can cause vibrations.
- ✅ Check that aftermarket wheels have sufficient clearance for the brake calipers, as some designs may interfere.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Hyundai Tucson — Frequently Asked Questions
What is the bolt pattern for a 2007 Hyundai Tucson?
The 2007 Hyundai Tucson uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 46mm.
What other years of Hyundai Tucson have the same bolt pattern as the 2007?
The Hyundai Tucson uses the 5x114.3 pattern from 2005 through 2024. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2007 Hyundai Tucson?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 46mm, and a center bore of at least 67.1mm (using hub rings if larger).
What does 46mm offset mean for the 2007 Tucson?
An offset of 46mm means the wheel's mounting surface is 46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
What is the PCD for a 2007 Hyundai Tucson?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 Tucson, the PCD is 5x114.3.
What lug nut size does the 2007 Hyundai Tucson use?
The 2007 Hyundai Tucson uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset