2023 Hyundai Venue Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2023 Hyundai Venue, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2023 Venue — Year-Specific Fitment Context
The 2023 Hyundai Venue is in year 4 of 5 using the 5x114.3 pattern (2020–2024). Wheels from any 2020–2024 Hyundai Venue are cross-compatible with the 2023 model.
Hyundai Venue Bolt Pattern by Year
The table below shows how the Venue's wheel specifications have changed over the years. The 2023 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2023 Hyundai Venue
The 2023 Hyundai Venue uses a 5x114.3 bolt pattern with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset must stay within 35-50mm; deviating risks rubbing suspension or fenders. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a conical (60-degree) seat, while aftermarket may require ball or conical. Improper lug nuts can cause wheel loosening. Verify compatibility with 2020-2024 Venue models.
Historical Fitment Data Reference
In our dataset, Hyundai Venue appears from 2020 to 2024 (5 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50 miles of driving to account for settling.
- ✅ Avoid spacers unless hub-centric and designed for 67.1mm bore; they alter offset and stress bearings.
- ✅ Check inner clearance for brake calipers and suspension components when selecting offset near 35mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2023 Hyundai Venue — Frequently Asked Questions
What is the bolt pattern for a 2023 Hyundai Venue?
The 2023 Hyundai Venue uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Venue have the same bolt pattern as the 2023?
The Hyundai Venue uses the 5x114.3 pattern from 2020 through 2024. Wheels from any of these model years are dimensionally compatible with the 2023, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2023 Hyundai Venue?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
What is the PCD for a 2023 Hyundai Venue?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2023 Venue, the PCD is 5x114.3.
What does 35-50mm offset mean for the 2023 Venue?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
What is the factory wheel offset for a 2023 Hyundai Venue?
The OEM offset for the 2023 Venue is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset