2012 Hyundai Veracruz Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Hyundai Veracruz, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2012 Veracruz — Year-Specific Fitment Context
The 2012 model year is the final year of the Hyundai Veracruz's 5x114.3 bolt pattern run (since 2007). Wheels from any 2007–2012 Hyundai Veracruz are cross-compatible with the 2012 model.
Hyundai Veracruz Bolt Pattern by Year
The table below shows how the Veracruz's wheel specifications have changed over the years. The 2012 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2012 Hyundai Veracruz
For your 2012 Hyundai Veracruz, the bolt pattern is 5x114.3mm with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings are mandatory to prevent vibration and ensure proper load distribution. The offset range is 35-50mm; staying within this range avoids rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—either conical (60-degree) or ball seat, matching the wheel's design. Improper lug nuts can lead to wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Hyundai Veracruz appears from 2007 to 2012 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Ensure aftermarket wheels have a center bore ≥67.1mm; use hub-centric rings to match.
- ✅ Avoid wheels with offset below 35mm to prevent rubbing on suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Hyundai Veracruz — Frequently Asked Questions
What is the bolt pattern for a 2012 Hyundai Veracruz?
The 2012 Hyundai Veracruz uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Hyundai Veracruz have the same bolt pattern as the 2012?
The Hyundai Veracruz uses the 5x114.3 pattern from 2007 through 2012. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
Do 2012 Hyundai Veracruzs use lug bolts or lug nuts?
The 2012 Veracruz requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2012 Hyundai Veracruz?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2012 Veracruz, the PCD is 5x114.3.
What does 35-50mm offset mean for the 2012 Veracruz?
An offset of 35-50mm means the wheel's mounting surface is 35-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Hyundai.
What is the center bore of a 2012 Hyundai Veracruz?
The factory center bore (hub bore) for the 2012 Hyundai Veracruz is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset