2011 INFINITI FX Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 INFINITI FX, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2011 FX — Year-Specific Fitment Context
The 2011 INFINITI FX is in year 9 of 11 using the 5x114.3 pattern (2003–2013). Wheels from any 2003–2013 INFINITI FX are cross-compatible with the 2011 model.
INFINITI FX Bolt Pattern by Year
The table below shows how the FX's wheel specifications have changed over the years. The 2011 model year is highlighted.
Fitment Notes
The 2011 INFINITI FX has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, INFINITI FX appears from 2003 to 2013 (11 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 10.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2011 INFINITI FX — Frequently Asked Questions
What is the bolt pattern for a 2011 INFINITI FX?
The 2011 INFINITI FX uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 45mm.
What other years of INFINITI FX have the same bolt pattern as the 2011?
The INFINITI FX uses the 5x114.3 pattern from 2003 through 2013. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Will wheels from another INFINITI fit my 2011 FX?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
What lug nut size does the 2011 INFINITI FX use?
The 2011 INFINITI FX uses N 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2011 INFINITI FX?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45mm, and a center bore of at least 66.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2011 INFINITI?
The 2011 FX uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
INFINITI FX is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2003-2013 (11 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 10.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2011 INFINITI FX, please report it via our About page contact so we can verify and update this record.