1993 INFINITI Q Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 INFINITI Q, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1993 Q — Year-Specific Fitment Context
The 1993 INFINITI Q is in year 2 of 15 using the 5x114.3 pattern (1992–2006). Wheels from any 1992–2006 INFINITI Q are cross-compatible with the 1993 model.
INFINITI Q Bolt Pattern by Year
The table below shows how the Q's wheel specifications have changed over the years. The 1993 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 66.1 | 40-50 |
| ▸ 1993 | 5x114.3 | 66.1 | 40-50 |
| 1994 | 5x114.3 | 66.1 | 40-50 |
| 1995 | 5x114.3 | 66.1 | 40-50 |
| 1996 | 5x114.3 | 66.1 | 40-50 |
| 1997 | 5x114.3 | 66.1 | 40-50 |
| 1998 | 5x114.3 | 66.1 | 40-50 |
| 1999 | 5x114.3 | 66.1 | 40-50 |
| 2000 | 5x114.3 | 66.1 | 40-50 |
| 2001 | 5x114.3 | 66.1 | 40-50 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2003 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1993 INFINITI Q
For the 1993 INFINITI Q, the bolt pattern is 5x114.3 with a critical center bore of 66.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings are mandatory to prevent vibrations and ensure proper load transfer. Offset must stay within 40-50mm; deviating risks rubbing or poor handling. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—either conical (60-degree) or ball seat, matching the wheel's design. Never mix seat types. Re-torque after 50-100 miles to maintain clamping force.
Historical Fitment Data Reference
In our dataset, INFINITI Q appears from 1992 to 2006 (15 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Always verify the wheel's center bore; if larger than 66.1mm, install hub-centric rings to avoid vibration.
- ✅ Stick to offset between 40-50mm; lower offset may cause fender rubbing, higher offset may contact suspension.
- ✅ Use only 12x1.25 lug nuts with the correct seat (conical or ball) as specified by the wheel manufacturer.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1993 INFINITI Q — Frequently Asked Questions
What is the bolt pattern for a 1993 INFINITI Q?
The 1993 INFINITI Q uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-50mm.
What other years of INFINITI Q have the same bolt pattern as the 1993?
The INFINITI Q uses the 5x114.3 pattern from 1992 through 2006. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
What lug nut size does the 1993 INFINITI Q use?
The 1993 INFINITI Q uses 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 1993 INFINITI Q?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1993 Q, the PCD is 5x114.3.
Can I put aftermarket wheels on my 1993 INFINITI Q?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40-50mm, and a center bore of at least 66.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 1993 INFINITI Q?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset