2002 INFINITI Q Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 INFINITI Q, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2002 Q — Year-Specific Fitment Context
The 2002 INFINITI Q is in year 11 of 15 using the 5x114.3 pattern (1992–2006). Wheels from any 1992–2006 INFINITI Q are cross-compatible with the 2002 model.
INFINITI Q Bolt Pattern by Year
The table below shows how the Q's wheel specifications have changed over the years. The 2002 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 66.1 | 40-50 |
| 1993 | 5x114.3 | 66.1 | 40-50 |
| 1994 | 5x114.3 | 66.1 | 40-50 |
| 1995 | 5x114.3 | 66.1 | 40-50 |
| 1996 | 5x114.3 | 66.1 | 40-50 |
| 1997 | 5x114.3 | 66.1 | 40-50 |
| 1998 | 5x114.3 | 66.1 | 40-50 |
| 1999 | 5x114.3 | 66.1 | 40-50 |
| 2000 | 5x114.3 | 66.1 | 40-50 |
| 2001 | 5x114.3 | 66.1 | 40-50 |
| ▸ 2002 | 5x114.3 | 66.1 | 40 |
| 2003 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
Fitment Notes
The 2002 INFINITI Q has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, INFINITI Q appears from 1992 to 2006 (15 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2002 INFINITI Q — Frequently Asked Questions
What is the bolt pattern for a 2002 INFINITI Q?
The 2002 INFINITI Q uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of INFINITI Q have the same bolt pattern as the 2002?
The INFINITI Q uses the 5x114.3 pattern from 1992 through 2006. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2002 INFINITI Q?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2002 INFINITI?
The 2002 Q uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2002 INFINITI Qs use lug bolts or lug nuts?
The 2002 Q requires N 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What does 40mm offset mean for the 2002 Q?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your INFINITI.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
INFINITI Q is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-2006 (15 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 90.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2002 INFINITI Q, please report it via our About page contact so we can verify and update this record.