2001 INFINITI Q Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 INFINITI Q, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2001 Q — Year-Specific Fitment Context
The 2001 INFINITI Q is in year 10 of 15 using the 5x114.3 pattern (1992–2006). Wheels from any 1992–2006 INFINITI Q are cross-compatible with the 2001 model.
INFINITI Q Bolt Pattern by Year
The table below shows how the Q's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 66.1 | 40-50 |
| 1993 | 5x114.3 | 66.1 | 40-50 |
| 1994 | 5x114.3 | 66.1 | 40-50 |
| 1995 | 5x114.3 | 66.1 | 40-50 |
| 1996 | 5x114.3 | 66.1 | 40-50 |
| 1997 | 5x114.3 | 66.1 | 40-50 |
| 1998 | 5x114.3 | 66.1 | 40-50 |
| 1999 | 5x114.3 | 66.1 | 40-50 |
| 2000 | 5x114.3 | 66.1 | 40-50 |
| ▸ 2001 | 5x114.3 | 66.1 | 40-50 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2003 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2001 INFINITI Q
For your 2001 INFINITI Q, the 5x114.3 bolt pattern and 66.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 40-50mm; deviations risk rubbing or poor handling. Always use lug nuts with the correct 12x1.25 thread pitch and proper seat type—tapered (60-degree cone) for most aftermarket wheels, or ball seat for factory INFINITI wheels. Mismatched seats cause loose fitment and wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, INFINITI Q appears from 1992 to 2006 (15 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Use hub-centric rings (66.1mm ID to aftermarket bore) to avoid vibrations.
- ✅ Check brake caliper clearance with aftermarket wheels; some designs may interfere.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 INFINITI Q — Frequently Asked Questions
What is the bolt pattern for a 2001 INFINITI Q?
The 2001 INFINITI Q uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40-50mm.
What other years of INFINITI Q have the same bolt pattern as the 2001?
The INFINITI Q uses the 5x114.3 pattern from 1992 through 2006. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
Why is matching the 66.1mm center bore important for the 2001 Q?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2001 INFINITI Q?
The OEM offset for the 2001 Q is typically around 40-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2001 INFINITI Q?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Can I put aftermarket wheels on my 2001 INFINITI Q?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40-50mm, and a center bore of at least 66.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset