2006 INFINITI Q Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 INFINITI Q, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2006 Q — Year-Specific Fitment Context
The 2006 model year is the final year of the INFINITI Q's 5x114.3 bolt pattern run (since 1992). Wheels from any 1992–2006 INFINITI Q are cross-compatible with the 2006 model.
INFINITI Q Bolt Pattern by Year
The table below shows how the Q's wheel specifications have changed over the years. The 2006 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 66.1 | 40-50 |
| 1993 | 5x114.3 | 66.1 | 40-50 |
| 1994 | 5x114.3 | 66.1 | 40-50 |
| 1995 | 5x114.3 | 66.1 | 40-50 |
| 1996 | 5x114.3 | 66.1 | 40-50 |
| 1997 | 5x114.3 | 66.1 | 40-50 |
| 1998 | 5x114.3 | 66.1 | 40-50 |
| 1999 | 5x114.3 | 66.1 | 40-50 |
| 2000 | 5x114.3 | 66.1 | 40-50 |
| 2001 | 5x114.3 | 66.1 | 40-50 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2003 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| ▸ 2006 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2006 INFINITI Q
For your 2006 INFINITI Q, the 5x114.3 bolt pattern is shared with 1992–2006 models, ensuring cross-compatibility. The 66.1mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration and ensure proper load distribution. Offset sensitivity is critical: stick to 40mm ±5mm to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (cone or ball seat) matching your wheels. Improper lug nuts can cause wheel detachment. Re-torque after 50–100 miles of driving.
Historical Fitment Data Reference
In our dataset, INFINITI Q appears from 1992 to 2006 (15 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 90.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80–90 ft-lbs after 50–100 miles of driving to ensure proper seating.
- ✅ Verify wheel hub bore is 66.1mm or larger; use hub-centric rings if larger to avoid vibrations.
- ✅ Check offset carefully: 40mm is optimal; deviations may require fender rolling or spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 INFINITI Q — Frequently Asked Questions
What is the bolt pattern for a 2006 INFINITI Q?
The 2006 INFINITI Q uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of INFINITI Q have the same bolt pattern as the 2006?
The INFINITI Q uses the 5x114.3 pattern from 1992 through 2006. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2006 INFINITI?
The 2006 Q uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2006 INFINITI Q use?
The 2006 INFINITI Q uses N 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2006 INFINITI Q?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2006 Q, the PCD is 5x114.3.
Will wheels from another INFINITI fit my 2006 Q?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset