2013 Jeep Compass Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Jeep Compass, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2013 Compass — Year-Specific Fitment Context
The 2013 Jeep Compass is in year 7 of 12 using the 5x114.3 pattern (2007–2018). Wheels from any 2007–2018 Jeep Compass are cross-compatible with the 2013 model. Across its full production run (2007–2024), the Compass has also used: 5x110.
Jeep Compass Bolt Pattern by Year
The table below shows how the Compass's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 5x114.3 | 67.1 | 40 |
| 2008 | 5x114.3 | 67.1 | 40 |
| 2009 | 5x114.3 | 67.1 | 40 |
| 2010 | 5x114.3 | 67.1 | 40 |
| 2011 | 5x114.3 | 67.1 | 40 |
| 2012 | 5x114.3 | 67.1 | 40 |
| ▸ 2013 | 5x114.3 | 67.1 | 40 |
| 2014 | 5x114.3 | 67.1 | 40 |
| 2015 | 5x114.3 | 67.1 | 40 |
| 2016 | 5x114.3 | 67.1 | 40 |
| 2017 | 5x114.3 | 67.1 | 40 |
| 2018 | 5x114.3 | 67.1 | 40 |
| 2019 | 5x110 | 65.1 | 40 |
| 2020 | 5x110 | 65.1 | 30-40mm |
| 2021 | 5x110 | 65.1 | 30-40mm |
| 2022 | 5x110 | 65.1 | 30-40mm |
| 2023 | 5x110 | 65.1 | 30-40mm |
| 2024 | 5x110 | 65.1 | 30-40mm |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2013 Jeep Compass
For your 2013 Jeep Compass, the critical fitment specs are: bolt pattern 5x114.3, center bore 67.1mm, offset 40mm, and lug nut size M12x1.50. The center bore must match exactly; aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive: staying within ±5mm of 40mm is recommended to avoid rubbing or clearance issues. Always use the correct lug nut seat (conical/60-degree) for aftermarket wheels; improper seating can cause wheel loss. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Jeep Compass appears from 2007 to 2024 (18 model years). Across model years, this model appears with 2 bolt patterns (5x110, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 95-100 ft-lbs after 50-100 miles of driving.
- ✅ Aftermarket wheels often require hub-centric rings (67.1mm to 73.1mm) to prevent vibration.
- ✅ Avoid using wheels with offset below 35mm or above 45mm to prevent rubbing on suspension or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Jeep Compass — Frequently Asked Questions
What is the bolt pattern for a 2013 Jeep Compass?
The 2013 Jeep Compass uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 40mm.
What other years of Jeep Compass have the same bolt pattern as the 2013?
The Jeep Compass uses the 5x114.3 pattern from 2007 through 2018. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
What does 40mm offset mean for the 2013 Compass?
An offset of 40mm means the wheel's mounting surface is 40mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Jeep.
Why is matching the 67.1mm center bore important for the 2013 Compass?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2013 Jeep Compass?
The OEM offset for the 2013 Compass is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2013 Jeep Compass?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset