2018 Jeep Compass Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Jeep Compass, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2018 Compass — Year-Specific Fitment Context
The 2018 model year is the final year of the Jeep Compass's 5x114.3 bolt pattern run (since 2007). Wheels from any 2007–2018 Jeep Compass are cross-compatible with the 2018 model. Important: starting in 2019, Jeep switched to 5x110 — those wheels will not fit the 2018 model. Across its full production run (2007–2024), the Compass has also used: 5x110.
Jeep Compass Bolt Pattern by Year
The table below shows how the Compass's wheel specifications have changed over the years. The 2018 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 5x114.3 | 67.1 | 40 |
| 2008 | 5x114.3 | 67.1 | 40 |
| 2009 | 5x114.3 | 67.1 | 40 |
| 2010 | 5x114.3 | 67.1 | 40 |
| 2011 | 5x114.3 | 67.1 | 40 |
| 2012 | 5x114.3 | 67.1 | 40 |
| 2013 | 5x114.3 | 67.1 | 40 |
| 2014 | 5x114.3 | 67.1 | 40 |
| 2015 | 5x114.3 | 67.1 | 40 |
| 2016 | 5x114.3 | 67.1 | 40 |
| 2017 | 5x114.3 | 67.1 | 40 |
| ▸ 2018 | 5x114.3 | 67.1 | 40 |
| 2019 | 5x110 | 65.1 | 40 |
| 2020 | 5x110 | 65.1 | 30-40mm |
| 2021 | 5x110 | 65.1 | 30-40mm |
| 2022 | 5x110 | 65.1 | 30-40mm |
| 2023 | 5x110 | 65.1 | 30-40mm |
| 2024 | 5x110 | 65.1 | 30-40mm |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2018 Jeep Compass
For your 2018 Jeep Compass, the bolt pattern is 5x114.3, but the center bore is 67.1mm—a critical dimension. Aftermarket wheels often have a larger bore, so you must use hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is around 40mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Always verify lug nut thread pitch: M12x1.50. Use conical (60-degree) or ball-seat lug nuts matching the wheel's seat type. Never mix seat types. Re-torque after 50-100 miles. Note: 2019+ Compass uses 5x110—those wheels won't fit.
Historical Fitment Data Reference
In our dataset, Jeep Compass appears from 2007 to 2024 (18 model years). Across model years, this model appears with 2 bolt patterns (5x110, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings for aftermarket wheels; the 67.1mm bore is unique and not shared with many other vehicles.
- ✅ Stick to offset between 35mm and 45mm; lower offsets may cause rubbing on the fender, higher offsets may contact the strut.
- ✅ Re-torque lug nuts to 100 ft-lb after 50-100 miles; use a torque wrench to avoid over-tightening and warping rotors.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Jeep Compass — Frequently Asked Questions
What is the bolt pattern for a 2018 Jeep Compass?
The 2018 Jeep Compass uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 40mm.
What other years of Jeep Compass have the same bolt pattern as the 2018?
The Jeep Compass uses the 5x114.3 pattern from 2007 through 2018. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
Will 2019 Jeep Compass wheels fit a 2018 model?
No. The 2019 Jeep Compass switched to a 5x110 bolt pattern, which is not compatible with the 2018 model's 5x114.3. Using mismatched patterns is unsafe.
Can I use spacers on my 2018 Jeep Compass?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
How tight should I torque the lug nuts on a 2018 Jeep Compass?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2018 Jeep?
The 2018 Compass uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset