2010 Jeep Compass Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Jeep Compass, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2010 Compass — Year-Specific Fitment Context
The 2010 Jeep Compass is in year 4 of 12 using the 5x114.3 pattern (2007–2018). Wheels from any 2007–2018 Jeep Compass are cross-compatible with the 2010 model. Across its full production run (2007–2024), the Compass has also used: 5x110.
Jeep Compass Bolt Pattern by Year
The table below shows how the Compass's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2007 | 5x114.3 | 67.1 | 40 |
| 2008 | 5x114.3 | 67.1 | 40 |
| 2009 | 5x114.3 | 67.1 | 40 |
| ▸ 2010 | 5x114.3 | 67.1 | 40 |
| 2011 | 5x114.3 | 67.1 | 40 |
| 2012 | 5x114.3 | 67.1 | 40 |
| 2013 | 5x114.3 | 67.1 | 40 |
| 2014 | 5x114.3 | 67.1 | 40 |
| 2015 | 5x114.3 | 67.1 | 40 |
| 2016 | 5x114.3 | 67.1 | 40 |
| 2017 | 5x114.3 | 67.1 | 40 |
| 2018 | 5x114.3 | 67.1 | 40 |
| 2019 | 5x110 | 65.1 | 40 |
| 2020 | 5x110 | 65.1 | 30-40mm |
| 2021 | 5x110 | 65.1 | 30-40mm |
| 2022 | 5x110 | 65.1 | 30-40mm |
| 2023 | 5x110 | 65.1 | 30-40mm |
| 2024 | 5x110 | 65.1 | 30-40mm |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2010 Jeep Compass
For your 2010 Jeep Compass, the bolt pattern is 5x114.3mm with a center bore of 67.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 40mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (conical/60-degree taper) to guarantee safe clamping force. Mismatched lug nuts can cause wheel loosening or damage. Verify that aftermarket wheels are load-rated for your vehicle's weight.
Historical Fitment Data Reference
In our dataset, Jeep Compass appears from 2007 to 2024 (18 model years). Across model years, this model appears with 2 bolt patterns (5x110, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ Avoid using wheels with a larger center bore without hub-centric rings; this is a common cause of steering wheel vibration.
- ✅ Check wheel clearance with the brake calipers and suspension components, especially if lowering the vehicle or using wider tires.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Jeep Compass — Frequently Asked Questions
What is the bolt pattern for a 2010 Jeep Compass?
The 2010 Jeep Compass uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 40mm.
What other years of Jeep Compass have the same bolt pattern as the 2010?
The Jeep Compass uses the 5x114.3 pattern from 2007 through 2018. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2010 Jeep?
The 2010 Compass uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Jeep fit my 2010 Compass?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Why is matching the 67.1mm center bore important for the 2010 Compass?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2010 Jeep Compass use?
The 2010 Jeep Compass uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset