2018 Kia Optima Hybrid Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Kia Optima Hybrid, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size 12x1.5
Center Bore (CB) 67.1 mm
Offset (ET) 35-50
Torque Specs 80 ft-lbs (108 Nm)

2018 Optima Hybrid — Year-Specific Fitment Context

The 2018 Kia Optima Hybrid is in year 4 of 6 using the 5x114.3 pattern (2015–2020). Wheels from any 2015–2020 Kia Optima Hybrid are cross-compatible with the 2018 model.

Kia Optima Hybrid Bolt Pattern by Year

The table below shows how the Optima Hybrid's wheel specifications have changed over the years. The 2018 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2015 5x114.3 67.1 41
2016 5x114.3 67.1 41
2017 5x114.3 67.1 41
▸ 2018 5x114.3 67.1 35-50
2019 5x114.3 67.1 35-50
2020 5x114.3 67.1 35-50

Fitment Notes

The 2018 Kia Optima Hybrid has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Kia Optima Hybrid appears from 2015 to 2020 (6 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

2018 Kia Optima Hybrid — Frequently Asked Questions

What is the bolt pattern for a 2018 Kia Optima Hybrid?

The 2018 Kia Optima Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.

What other years of Kia Optima Hybrid have the same bolt pattern as the 2018?

The Kia Optima Hybrid uses the 5x114.3 pattern from 2015 through 2020. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.

Do 2018 Kia Optima Hybrids use lug bolts or lug nuts?

The 2018 Optima Hybrid requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

How do I measure the bolt pattern on my 2018 Kia?

The 2018 Optima Hybrid uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

What lug nut size does the 2018 Kia Optima Hybrid use?

The 2018 Kia Optima Hybrid uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

Will wheels from another Kia fit my 2018 Optima Hybrid?

Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Kia Optima Hybrid is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2018 Kia Optima Hybrid, please report it via our About page contact so we can verify and update this record.

Kia Optima Hybrid By Year

2015 2016 2017 2018 2019 2020

Other Kia Models

Amanti Borrego Cadenza EV6 EV9 Forte Forte5 K5 Niro Niro EV Optima Optima Hybrid Optima Plug-in Hybrid Rondo Sedona Seltos Sephia Sorento Plug-in Hybrid Soul Soul EV