2008 Kia Rondo Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Kia Rondo, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 35-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 Rondo — Year-Specific Fitment Context
The 2008 Kia Rondo is in year 2 of 4 using the 5x114.3 pattern (2007–2010). Wheels from any 2007–2010 Kia Rondo are cross-compatible with the 2008 model.
Kia Rondo Bolt Pattern by Year
The table below shows how the Rondo's wheel specifications have changed over the years. The 2008 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Kia Rondo
For your 2008 Kia Rondo, the bolt pattern is 5x114.3 with a critical center bore of 67.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings (67.1mm ID to wheel bore OD) are mandatory to prevent vibration and ensure proper load distribution. Offset must stay within 35-50mm; deviations risk rubbing suspension or fenders. Use only 12x1.5 lug nuts with the correct seat type—factory wheels use a conical (60-degree) seat, while aftermarket may require ball or conical seats. Never mix seat types; improper engagement can cause wheel loss. Always torque to manufacturer specs (80-100 ft-lbs) and re-torque after 50 miles.
Historical Fitment Data Reference
In our dataset, Kia Rondo appears from 2007 to 2010 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to account for wheel settling.
- ✅ Verify wheel bore is at least 67.1mm; use hub-centric rings if larger.
- ✅ Check offset carefully: +35mm may rub fender, +50mm may contact strut.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Kia Rondo — Frequently Asked Questions
What is the bolt pattern for a 2008 Kia Rondo?
The 2008 Kia Rondo uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 35-50mm.
What other years of Kia Rondo have the same bolt pattern as the 2008?
The Kia Rondo uses the 5x114.3 pattern from 2007 through 2010. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the factory wheel offset for a 2008 Kia Rondo?
The OEM offset for the 2008 Rondo is typically around 35-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2008 Kia?
The 2008 Rondo uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2008 Kia Rondo?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
What is the center bore of a 2008 Kia Rondo?
The factory center bore (hub bore) for the 2008 Kia Rondo is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset