2012 MAZDA MAZDA5 Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 MAZDA MAZDA5, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size N 12x1.50
Center Bore (CB) 67.1 mm
Offset (ET) 52,5
Torque Specs 80 ft-lbs (108 Nm)

2012 MAZDA5 — Year-Specific Fitment Context

The 2012 MAZDA MAZDA5 is in year 7 of 10 using the 5x114.3 pattern (2006–2015). Wheels from any 2006–2015 MAZDA MAZDA5 are cross-compatible with the 2012 model.

MAZDA MAZDA5 Bolt Pattern by Year

The table below shows how the MAZDA5's wheel specifications have changed over the years. The 2012 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2006 5x114.3 67.1 52,5
2007 5x114.3 67.1 52,5
2008 5x114.3 67.1 52,5
2009 5x114.3 67.1 52,5
2010 5x114.3 67.1 52,5
▸ 2012 5x114.3 67.1 52,5
2013 5x114.3 67.1 52,5
2014 5x114.3 67.1 52,5
2015 5x114.3 67.1 52,5

Fitment Notes

The 2012 MAZDA MAZDA5 has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, MAZDA MAZDA5 appears from 2006 to 2015 (9 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

2012 MAZDA MAZDA5 — Frequently Asked Questions

What is the bolt pattern for a 2012 MAZDA MAZDA5?

The 2012 MAZDA MAZDA5 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 52,5mm.

What other years of MAZDA MAZDA5 have the same bolt pattern as the 2012?

The MAZDA MAZDA5 uses the 5x114.3 pattern from 2006 through 2015. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.

Why is matching the 67.1mm center bore important for the 2012 MAZDA5?

The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.

Do 2012 MAZDA MAZDA5s use lug bolts or lug nuts?

The 2012 MAZDA5 requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

What lug nut size does the 2012 MAZDA MAZDA5 use?

The 2012 MAZDA MAZDA5 uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

What is the center bore of a 2012 MAZDA MAZDA5?

The factory center bore (hub bore) for the 2012 MAZDA MAZDA5 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

MAZDA MAZDA5 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2012 MAZDA MAZDA5, please report it via our About page contact so we can verify and update this record.

MAZDA MAZDA5 By Year

2006 2007 2008 2009 2010 2012 2013 2014 2015

Other MAZDA Models

323 626 B-Series Cab Plus B-Series Extended Cab B-Series Regular Cab CX-50 CX-90 CX-90 PHEV MAZDA3 MAZDA5 MAZDA6 MPV MX-3 MX-30 MX-5 Miata MX-6 Navajo Protege5 RX-7 Tribute