2010 MAZDA MAZDA6 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 MAZDA MAZDA6, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2010 MAZDA6 — Year-Specific Fitment Context
The 2010 MAZDA MAZDA6 is in year 8 of 19 using the 5x114.3 pattern (2003–2021). Wheels from any 2003–2021 MAZDA MAZDA6 are cross-compatible with the 2010 model.
MAZDA MAZDA6 Bolt Pattern by Year
The table below shows how the MAZDA6's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x114.3 | 67.1 | 50 |
| 2004 | 5x114.3 | 67.1 | 50 |
| 2005 | 5x114.3 | 67.1 | 50 |
| 2006 | 5x114.3 | 67.1 | 50 |
| 2007 | 5x114.3 | 67.1 | 50 |
| 2008 | 5x114.3 | 67.1 | 50 |
| 2009 | 5x114.3 | 67.1 | 50 |
| ▸ 2010 | 5x114.3 | 67.1 | 50 |
| 2011 | 5x114.3 | 67.1 | 50 |
| 2012 | 5x114.3 | 67.1 | 50 |
| 2013 | 5x114.3 | 67.1 | 50 |
| 2014 | 5x114.3 | 67.1 | 50 |
| 2015 | 5x114.3 | 67.1 | 50 |
| 2016 | 5x114.3 | 67.1 | 50 |
| 2017 | 5x114.3 | 67.1 | 50 |
| 2018 | 5x114.3 | 67.1 | 45-50 |
| 2019 | 5x114.3 | 67.1 | 45-50 |
| 2020 | 5x114.3 | 67.1 | 45-50 |
| 2021 | 5x114.3 | 67.1 | 45-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2010 MAZDA MAZDA6
For your 2010 Mazda Mazda6, the 5x114.3 bolt pattern is shared across 2003–2021 models, but the 67.1mm center bore is critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. Offset is sensitive: the factory 50mm offset maintains suspension geometry and brake clearance. Deviating more than ±5mm may cause rubbing or handling issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (60-degree conical). Ball-seat or incorrect pitch nuts can loosen or damage the wheel. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, MAZDA MAZDA6 appears from 2003 to 2021 (19 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lb after 50 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; vibrations and stud stress may result.
- ✅ Check inner clearance for aftermarket wheels; the 2010 Mazda6 has limited space near the strut and brake caliper.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 MAZDA MAZDA6 — Frequently Asked Questions
What is the bolt pattern for a 2010 MAZDA MAZDA6?
The 2010 MAZDA MAZDA6 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 50mm.
What other years of MAZDA MAZDA6 have the same bolt pattern as the 2010?
The MAZDA MAZDA6 uses the 5x114.3 pattern from 2003 through 2021. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What lug nut size does the 2010 MAZDA MAZDA6 use?
The 2010 MAZDA MAZDA6 uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2010 MAZDA MAZDA6?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
How do I measure the bolt pattern on my 2010 MAZDA?
The 2010 MAZDA6 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2010 MAZDA MAZDA6?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 50mm, and a center bore of at least 67.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset