2009 MAZDA MAZDA6 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 MAZDA MAZDA6, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2009 MAZDA6 — Year-Specific Fitment Context
The 2009 MAZDA MAZDA6 is in year 7 of 19 using the 5x114.3 pattern (2003–2021). Wheels from any 2003–2021 MAZDA MAZDA6 are cross-compatible with the 2009 model.
MAZDA MAZDA6 Bolt Pattern by Year
The table below shows how the MAZDA6's wheel specifications have changed over the years. The 2009 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x114.3 | 67.1 | 50 |
| 2004 | 5x114.3 | 67.1 | 50 |
| 2005 | 5x114.3 | 67.1 | 50 |
| 2006 | 5x114.3 | 67.1 | 50 |
| 2007 | 5x114.3 | 67.1 | 50 |
| 2008 | 5x114.3 | 67.1 | 50 |
| ▸ 2009 | 5x114.3 | 67.1 | 50 |
| 2010 | 5x114.3 | 67.1 | 50 |
| 2011 | 5x114.3 | 67.1 | 50 |
| 2012 | 5x114.3 | 67.1 | 50 |
| 2013 | 5x114.3 | 67.1 | 50 |
| 2014 | 5x114.3 | 67.1 | 50 |
| 2015 | 5x114.3 | 67.1 | 50 |
| 2016 | 5x114.3 | 67.1 | 50 |
| 2017 | 5x114.3 | 67.1 | 50 |
| 2018 | 5x114.3 | 67.1 | 45-50 |
| 2019 | 5x114.3 | 67.1 | 45-50 |
| 2020 | 5x114.3 | 67.1 | 45-50 |
| 2021 | 5x114.3 | 67.1 | 45-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2009 MAZDA MAZDA6
For your 2009 MAZDA MAZDA6, the 5x114.3 bolt pattern is shared across 2003–2021 models, but critical specs differ. The 67.1mm center bore must match aftermarket wheels; if larger, use hub-centric rings to prevent vibration and ensure load is on the hub, not lugs. Offset is sensitive: stock is 50mm; deviations affect handling and clearance. Avoid offsets below 45mm (risk fender rub) or above 55mm (may contact suspension). Always use lug nuts with 12x1.5 thread pitch and correct seat (cone or ball) matching the wheel. Improper seating can cause loosening. Verify wheel load rating exceeds vehicle weight. Safety first: incorrect fitment compromises braking and steering.
Historical Fitment Data Reference
In our dataset, MAZDA MAZDA6 appears from 2003 to 2021 (19 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for wheel seating and thermal expansion.
- ✅ When using aftermarket wheels, confirm the hub bore is at least 67.1mm; use hub-centric rings for larger bores to avoid vibrations.
- ✅ For lowered vehicles, offset adjustments may be needed; test fitment with suspension compressed to check clearance.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 MAZDA MAZDA6 — Frequently Asked Questions
What is the bolt pattern for a 2009 MAZDA MAZDA6?
The 2009 MAZDA MAZDA6 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 50mm.
What other years of MAZDA MAZDA6 have the same bolt pattern as the 2009?
The MAZDA MAZDA6 uses the 5x114.3 pattern from 2003 through 2021. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
What is the factory wheel offset for a 2009 MAZDA MAZDA6?
The OEM offset for the 2009 MAZDA6 is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 50mm offset mean for the 2009 MAZDA6?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your MAZDA.
What lug nut size does the 2009 MAZDA MAZDA6 use?
The 2009 MAZDA MAZDA6 uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2009 MAZDA MAZDA6?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 50mm, and a center bore of at least 67.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset