2011 MAZDA MAZDA6 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 MAZDA MAZDA6, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 MAZDA6 — Year-Specific Fitment Context
The 2011 MAZDA MAZDA6 is in year 9 of 19 using the 5x114.3 pattern (2003–2021). Wheels from any 2003–2021 MAZDA MAZDA6 are cross-compatible with the 2011 model.
MAZDA MAZDA6 Bolt Pattern by Year
The table below shows how the MAZDA6's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x114.3 | 67.1 | 50 |
| 2004 | 5x114.3 | 67.1 | 50 |
| 2005 | 5x114.3 | 67.1 | 50 |
| 2006 | 5x114.3 | 67.1 | 50 |
| 2007 | 5x114.3 | 67.1 | 50 |
| 2008 | 5x114.3 | 67.1 | 50 |
| 2009 | 5x114.3 | 67.1 | 50 |
| 2010 | 5x114.3 | 67.1 | 50 |
| ▸ 2011 | 5x114.3 | 67.1 | 50 |
| 2012 | 5x114.3 | 67.1 | 50 |
| 2013 | 5x114.3 | 67.1 | 50 |
| 2014 | 5x114.3 | 67.1 | 50 |
| 2015 | 5x114.3 | 67.1 | 50 |
| 2016 | 5x114.3 | 67.1 | 50 |
| 2017 | 5x114.3 | 67.1 | 50 |
| 2018 | 5x114.3 | 67.1 | 45-50 |
| 2019 | 5x114.3 | 67.1 | 45-50 |
| 2020 | 5x114.3 | 67.1 | 45-50 |
| 2021 | 5x114.3 | 67.1 | 45-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2011 MAZDA MAZDA6
For your 2011 MAZDA MAZDA6, the 5x114.3 bolt pattern and 67.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: the factory 50mm offset maintains suspension geometry and brake clearance; deviations beyond ±5mm may cause rubbing or handling issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical 60-degree for most aftermarket wheels; ball seat for OEM). Improper lug nuts can lead to wheel loosening. Verify wheel load rating exceeds vehicle weight.
Historical Fitment Data Reference
In our dataset, MAZDA MAZDA6 appears from 2003 to 2021 (19 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid spacers unless hub-centric and with extended studs; they alter offset and stress bearings.
- ✅ Check brake caliper clearance with aftermarket wheels, especially for larger diameter or offset changes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 MAZDA MAZDA6 — Frequently Asked Questions
What is the bolt pattern for a 2011 MAZDA MAZDA6?
The 2011 MAZDA MAZDA6 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 50mm.
What other years of MAZDA MAZDA6 have the same bolt pattern as the 2011?
The MAZDA MAZDA6 uses the 5x114.3 pattern from 2003 through 2021. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2011 MAZDA MAZDA6?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 50mm, and a center bore of at least 67.1mm (using hub rings if larger).
What is the factory wheel offset for a 2011 MAZDA MAZDA6?
The OEM offset for the 2011 MAZDA6 is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 67.1mm center bore important for the 2011 MAZDA6?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 2011 MAZDA MAZDA6?
The factory center bore (hub bore) for the 2011 MAZDA MAZDA6 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset