2014 MAZDA MAZDA6 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2014 MAZDA MAZDA6 is 5x114.3 (5x4.5"). It has a center bore of 67.1 mm, an offset range of 50, and utilizes N 12x1.50 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2014 MAZDA MAZDA6 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 67.1 mm |
| Offset Range (ET) | 50 |
| Thread Size (Lug Nut / Bolt) | N 12x1.50 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2014 MAZDA6 — Year-Specific Fitment Context
The 2014 MAZDA MAZDA6 is in year 12 of 19 using the 5x114.3 pattern (2003–2021). Wheels from any 2003–2021 MAZDA MAZDA6 are cross-compatible with the 2014 model.
MAZDA MAZDA6 Bolt Pattern by Year
The table below shows how the MAZDA6's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x114.3 | 67.1 | 50 |
| 2004 | 5x114.3 | 67.1 | 50 |
| 2005 | 5x114.3 | 67.1 | 50 |
| 2006 | 5x114.3 | 67.1 | 50 |
| 2007 | 5x114.3 | 67.1 | 50 |
| 2008 | 5x114.3 | 67.1 | 50 |
| 2009 | 5x114.3 | 67.1 | 50 |
| 2010 | 5x114.3 | 67.1 | 50 |
| 2011 | 5x114.3 | 67.1 | 50 |
| 2012 | 5x114.3 | 67.1 | 50 |
| 2013 | 5x114.3 | 67.1 | 50 |
| ▸ 2014 | 5x114.3 | 67.1 | 50 |
| 2015 | 5x114.3 | 67.1 | 50 |
| 2016 | 5x114.3 | 67.1 | 50 |
| 2017 | 5x114.3 | 67.1 | 50 |
| 2018 | 5x114.3 | 67.1 | 45-50 |
| 2019 | 5x114.3 | 67.1 | 45-50 |
| 2020 | 5x114.3 | 67.1 | 45-50 |
| 2021 | 5x114.3 | 67.1 | 45-50 |
2014 MAZDA MAZDA6 Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3165 vehicles in our database (very common). For safe wheel swaps on the 2014 MAZDA MAZDA6, donor rims must match the 5x114.3 PCD and have a center bore of at least 67.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 67.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2013 Hyundai Veloster | 67.1 mm (Exact) | 46 | N 12x1.50 (Cone) |
| 2020 Hyundai Venue | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2007 Hyundai Veracruz | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2001 Hyundai XG300 | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2002 Hyundai XG350 | 67.1 mm (Exact) | 35-50 | 12x1.5 (Cone) |
| 2007 Jeep Compass | 67.1 mm (Exact) | 40 | N 12x1.50 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1992 Jeep Cherokee | 71.6 mm | 71.6mm → 67.1mm |
32 |
| 1992 Jeep Comanche Regular Cab | 71.5 mm | 71.5mm → 67.1mm |
30-40mm |
| 1993 Jeep Grand Cherokee | 71.6 mm | 71.6mm → 67.1mm |
25 |
| 2002 Jeep Liberty | 71.6 mm | 71.6mm → 67.1mm |
42 |
| 1997 Jeep Wrangler | 71.6 mm | 71.6mm → 67.1mm |
25 |
Expert Buying Guide for 2014 MAZDA MAZDA6
The 2014 Mazda Mazda6 uses a 5x114.3 bolt pattern with a 67.1mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.5) and seat type (cone or ball) to avoid wheel loosening. Use only compatible lug nuts and torque to manufacturer specifications. Cross-compatible with 2003–2021 Mazda6 wheels.
Historical Fitment Data Reference
In our dataset, MAZDA MAZDA6 appears from 2003 to 2021 (19 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ Avoid wheels with offset below 45mm or above 55mm to prevent fender rubbing or brake caliper contact.
- ✅ Inspect wheel hub bore for corrosion; clean and apply anti-seize to prevent wheel seizure.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
2014 MAZDA MAZDA6 — Frequently Asked Questions
What is the bolt pattern for a 2014 MAZDA MAZDA6?
The 2014 MAZDA MAZDA6 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 50mm.
What other years of MAZDA MAZDA6 have the same bolt pattern as the 2014?
The MAZDA MAZDA6 uses the 5x114.3 pattern from 2003 through 2021. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What is the PCD for a 2014 MAZDA MAZDA6?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2014 MAZDA6, the PCD is 5x114.3.
What is the center bore of a 2014 MAZDA MAZDA6?
The factory center bore (hub bore) for the 2014 MAZDA MAZDA6 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2014 MAZDA MAZDA6?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 50mm, and a center bore of at least 67.1mm (using hub rings if larger).
What is the factory wheel offset for a 2014 MAZDA MAZDA6?
The OEM offset for the 2014 MAZDA6 is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →