2019 MAZDA MAZDA6 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 MAZDA MAZDA6, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 MAZDA6 — Year-Specific Fitment Context
The 2019 MAZDA MAZDA6 is in year 17 of 19 using the 5x114.3 pattern (2003–2021). Wheels from any 2003–2021 MAZDA MAZDA6 are cross-compatible with the 2019 model.
MAZDA MAZDA6 Bolt Pattern by Year
The table below shows how the MAZDA6's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x114.3 | 67.1 | 50 |
| 2004 | 5x114.3 | 67.1 | 50 |
| 2005 | 5x114.3 | 67.1 | 50 |
| 2006 | 5x114.3 | 67.1 | 50 |
| 2007 | 5x114.3 | 67.1 | 50 |
| 2008 | 5x114.3 | 67.1 | 50 |
| 2009 | 5x114.3 | 67.1 | 50 |
| 2010 | 5x114.3 | 67.1 | 50 |
| 2011 | 5x114.3 | 67.1 | 50 |
| 2012 | 5x114.3 | 67.1 | 50 |
| 2013 | 5x114.3 | 67.1 | 50 |
| 2014 | 5x114.3 | 67.1 | 50 |
| 2015 | 5x114.3 | 67.1 | 50 |
| 2016 | 5x114.3 | 67.1 | 50 |
| 2017 | 5x114.3 | 67.1 | 50 |
| 2018 | 5x114.3 | 67.1 | 45-50 |
| ▸ 2019 | 5x114.3 | 67.1 | 45-50 |
| 2020 | 5x114.3 | 67.1 | 45-50 |
| 2021 | 5x114.3 | 67.1 | 45-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 MAZDA MAZDA6
The 2019 MAZDA MAZDA6 requires wheels with a 5x114.3 bolt pattern, 67.1mm center bore, and offset between 45-50mm. The center bore is critical for proper hub-centric fitment; aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure load is carried by the hub, not the lug nuts. Offset outside the 45-50mm range can cause rubbing or poor handling. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree taper) to avoid wheel loosening. Never use ball-seat lug nuts on conical-seat wheels, as this compromises safety.
Historical Fitment Data Reference
In our dataset, MAZDA MAZDA6 appears from 2003 to 2021 (19 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-100 ft-lbs after 50-100 miles of driving to account for settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel vibration and uneven wear.
- ✅ When lowering the vehicle, offset may need to be adjusted to prevent tire rubbing against fenders or suspension.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 MAZDA MAZDA6 — Frequently Asked Questions
What is the bolt pattern for a 2019 MAZDA MAZDA6?
The 2019 MAZDA MAZDA6 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.
What other years of MAZDA MAZDA6 have the same bolt pattern as the 2019?
The MAZDA MAZDA6 uses the 5x114.3 pattern from 2003 through 2021. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What does 45-50mm offset mean for the 2019 MAZDA6?
An offset of 45-50mm means the wheel's mounting surface is 45-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your MAZDA.
Can I put aftermarket wheels on my 2019 MAZDA MAZDA6?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45-50mm, and a center bore of at least 67.1mm (using hub rings if larger).
Will wheels from another MAZDA fit my 2019 MAZDA6?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the center bore of a 2019 MAZDA MAZDA6?
The factory center bore (hub bore) for the 2019 MAZDA MAZDA6 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset