2007 MAZDA MAZDA6 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 MAZDA MAZDA6, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2007 MAZDA6 — Year-Specific Fitment Context
The 2007 MAZDA MAZDA6 is in year 5 of 19 using the 5x114.3 pattern (2003–2021). Wheels from any 2003–2021 MAZDA MAZDA6 are cross-compatible with the 2007 model.
MAZDA MAZDA6 Bolt Pattern by Year
The table below shows how the MAZDA6's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x114.3 | 67.1 | 50 |
| 2004 | 5x114.3 | 67.1 | 50 |
| 2005 | 5x114.3 | 67.1 | 50 |
| 2006 | 5x114.3 | 67.1 | 50 |
| ▸ 2007 | 5x114.3 | 67.1 | 50 |
| 2008 | 5x114.3 | 67.1 | 50 |
| 2009 | 5x114.3 | 67.1 | 50 |
| 2010 | 5x114.3 | 67.1 | 50 |
| 2011 | 5x114.3 | 67.1 | 50 |
| 2012 | 5x114.3 | 67.1 | 50 |
| 2013 | 5x114.3 | 67.1 | 50 |
| 2014 | 5x114.3 | 67.1 | 50 |
| 2015 | 5x114.3 | 67.1 | 50 |
| 2016 | 5x114.3 | 67.1 | 50 |
| 2017 | 5x114.3 | 67.1 | 50 |
| 2018 | 5x114.3 | 67.1 | 45-50 |
| 2019 | 5x114.3 | 67.1 | 45-50 |
| 2020 | 5x114.3 | 67.1 | 45-50 |
| 2021 | 5x114.3 | 67.1 | 45-50 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2007 MAZDA MAZDA6
For the 2007 MAZDA MAZDA6, the 5x114.3 bolt pattern is shared across 2003–2021 models. The 67.1mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load distribution. Offset is sensitive: stock is 50mm, and deviating more than ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct 12x1.50 thread pitch and a 60-degree conical seat (common for aftermarket wheels) or ball seat (OEM Mazda). Mixing seat types can lead to wheel loosening. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, MAZDA MAZDA6 appears from 2003 to 2021 (19 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 67.1mm; outer diameter must match wheel bore.
- ✅ Check inner clearance for aftermarket wheels with offset below 45mm; strut or fender contact is common.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 MAZDA MAZDA6 — Frequently Asked Questions
What is the bolt pattern for a 2007 MAZDA MAZDA6?
The 2007 MAZDA MAZDA6 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 50mm.
What other years of MAZDA MAZDA6 have the same bolt pattern as the 2007?
The MAZDA MAZDA6 uses the 5x114.3 pattern from 2003 through 2021. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2007 MAZDA?
The 2007 MAZDA6 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2007 MAZDA MAZDA6?
The factory center bore (hub bore) for the 2007 MAZDA MAZDA6 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does 50mm offset mean for the 2007 MAZDA6?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your MAZDA.
What lug nut size does the 2007 MAZDA MAZDA6 use?
The 2007 MAZDA MAZDA6 uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset