2002 MAZDA Millenia Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 MAZDA Millenia, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size 12x1.5
Center Bore (CB) 67.1 mm
Offset (ET) 45-50
Torque Specs 80 ft-lbs (108 Nm)

2002 Millenia — Year-Specific Fitment Context

The 2002 model year is the final year of the MAZDA Millenia's 5x114.3 bolt pattern run (since 1995). Wheels from any 1995–2002 MAZDA Millenia are cross-compatible with the 2002 model.

MAZDA Millenia Bolt Pattern by Year

The table below shows how the Millenia's wheel specifications have changed over the years. The 2002 model year is highlighted.

Year Bolt Pattern Center Bore Offset
1995 5x114.3 67.1 45-50
1996 5x114.3 67.1 45-50
1997 5x114.3 67.1 45-50
1998 5x114.3 67.1 45-50
1999 5x114.3 67.1 45-50
2000 5x114.3 67.1 45-50
2001 5x114.3 67.1 45-50
▸ 2002 5x114.3 67.1 45-50

Fitment Notes

The 2002 MAZDA Millenia has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, MAZDA Millenia appears from 1995 to 2002 (8 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

2002 MAZDA Millenia — Frequently Asked Questions

What is the bolt pattern for a 2002 MAZDA Millenia?

The 2002 MAZDA Millenia uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 45-50mm.

What other years of MAZDA Millenia have the same bolt pattern as the 2002?

The MAZDA Millenia uses the 5x114.3 pattern from 1995 through 2002. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.

What lug nut size does the 2002 MAZDA Millenia use?

The 2002 MAZDA Millenia uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

What is the factory wheel offset for a 2002 MAZDA Millenia?

The OEM offset for the 2002 Millenia is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Will wheels from another MAZDA fit my 2002 Millenia?

Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.

How tight should I torque the lug nuts on a 2002 MAZDA Millenia?

Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

MAZDA Millenia is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2002 MAZDA Millenia, please report it via our About page contact so we can verify and update this record.

MAZDA Millenia By Year

1995 1996 1997 1998 1999 2000 2001 2002

Other MAZDA Models

626 929 B-Series Cab Plus B-Series Extended Cab CX-3 CX-30 CX-5 CX-90 MAZDA2 MAZDA3 MAZDA5 MAZDA6 MX-3 MX-5 Miata Millenia Navajo Protege RX-7 RX-8 Tribute