2007 MAZDA RX-8 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 MAZDA RX-8, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 RX-8 — Year-Specific Fitment Context
The 2007 MAZDA RX-8 is in year 4 of 8 using the 5x114.3 pattern (2004–2011). Wheels from any 2004–2011 MAZDA RX-8 are cross-compatible with the 2007 model.
MAZDA RX-8 Bolt Pattern by Year
The table below shows how the RX-8's wheel specifications have changed over the years. The 2007 model year is highlighted.
Fitment Notes
The 2007 MAZDA RX-8 has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, MAZDA RX-8 appears from 2004 to 2011 (8 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2007 MAZDA RX-8 — Frequently Asked Questions
What is the bolt pattern for a 2007 MAZDA RX-8?
The 2007 MAZDA RX-8 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 50mm.
What other years of MAZDA RX-8 have the same bolt pattern as the 2007?
The MAZDA RX-8 uses the 5x114.3 pattern from 2004 through 2011. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What is the center bore of a 2007 MAZDA RX-8?
The factory center bore (hub bore) for the 2007 MAZDA RX-8 is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2007 MAZDA RX-8s use lug bolts or lug nuts?
The 2007 RX-8 requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2007 MAZDA?
The 2007 RX-8 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another MAZDA fit my 2007 RX-8?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
MAZDA RX-8 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2004-2011 (8 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2007 MAZDA RX-8, please report it via our About page contact so we can verify and update this record.