1994 Mercury Tracer Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Mercury Tracer, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 4x100
Lug Nut / Bolt Size M12x1.5
Center Bore (CB) 54.1 mm
Offset (ET) 35-45mm
Torque Specs 80 ft-lbs (108 Nm)

1994 Tracer — Year-Specific Fitment Context

The 1994 Mercury Tracer is in year 3 of 8 using the 4x100 pattern (1992–1999). Wheels from any 1992–1999 Mercury Tracer are cross-compatible with the 1994 model.

Mercury Tracer Bolt Pattern by Year

The table below shows how the Tracer's wheel specifications have changed over the years. The 1994 model year is highlighted.

Year Bolt Pattern Center Bore Offset
1992 4x100 54.1 35-45mm
1993 4x100 54.1 35-45mm
▸ 1994 4x100 54.1 35-45mm
1995 4x100 54.1 35-45mm
1996 4x100 54.1 35-45mm
1997 4x100 54.1 35-45mm
1998 4x100 54.1 35-45mm
1999 4x100 54.1 35-45mm

Fitment Notes

The 1994 Mercury Tracer has a bolt pattern of 4x100.

This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Mercury Tracer appears from 1992 to 1999 (8 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

4x100 Pattern Context

This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.

Examples of other vehicles using 4x100:

1994 Mercury Tracer — Frequently Asked Questions

What is the bolt pattern for a 1994 Mercury Tracer?

The 1994 Mercury Tracer uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 35-45mmmm.

What other years of Mercury Tracer have the same bolt pattern as the 1994?

The Mercury Tracer uses the 4x100 pattern from 1992 through 1999. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.

Why is matching the 54.1mm center bore important for the 1994 Tracer?

The 54.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.

What is the factory wheel offset for a 1994 Mercury Tracer?

The OEM offset for the 1994 Tracer is typically around 35-45mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

What does 35-45mmmm offset mean for the 1994 Tracer?

An offset of 35-45mmmm means the wheel's mounting surface is 35-45mmmm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Mercury.

What is the center bore of a 1994 Mercury Tracer?

The factory center bore (hub bore) for the 1994 Mercury Tracer is 54.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Mercury Tracer is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 1994 Mercury Tracer, please report it via our About page contact so we can verify and update this record.

Mercury Tracer By Year

1992 1993 1994 1995 1996 1997 1998 1999

Other Mercury Models

Capri Cougar Grand Marquis Marauder Mariner Milan Montego Monterey Mountaineer Mystique Sable Topaz Tracer Villager