1993 Mitsubishi Mighty Max Macro Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Mitsubishi Mighty Max Macro Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1993 Mighty Max Macro Cab — Year-Specific Fitment Context
The 1993 Mitsubishi Mighty Max Macro Cab is in year 2 of 3 using the 5x114.3 pattern (1992–1994). Wheels from any 1992–1994 Mitsubishi Mighty Max Macro Cab are cross-compatible with the 1993 model.
Mitsubishi Mighty Max Macro Cab Bolt Pattern by Year
The table below shows how the Mighty Max Macro Cab's wheel specifications have changed over the years. The 1993 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1993 Mitsubishi Mighty Max Macro Cab
For your 1993 Mitsubishi Mighty Max Macro Cab, the 5x114.3 bolt pattern is shared with 1992-1994 models. The 67.1mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration and ensure proper load distribution. Offset must stay within 38-46mm; deviations risk rubbing or suspension interference. Always use 12x1.5 lug nuts with correct seat type—factory wheels use conical (60-degree) seats; aftermarket wheels may require ball or conical seats. Never mix seat types. Torque to 80-100 ft-lbs in a star pattern. Verify wheel clearance with suspension and brake components before final installation.
Historical Fitment Data Reference
In our dataset, Mitsubishi Mighty Max Macro Cab appears from 1992 to 1994 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stud failure.
- ✅ Check that aftermarket wheels clear the front brake calipers, as some designs may interfere.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1993 Mitsubishi Mighty Max Macro Cab — Frequently Asked Questions
What is the bolt pattern for a 1993 Mitsubishi Mighty Max Macro Cab?
The 1993 Mitsubishi Mighty Max Macro Cab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Mighty Max Macro Cab have the same bolt pattern as the 1993?
The Mitsubishi Mighty Max Macro Cab uses the 5x114.3 pattern from 1992 through 1994. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
Do 1993 Mitsubishi Mighty Max Macro Cabs use lug bolts or lug nuts?
The 1993 Mighty Max Macro Cab requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 1993 Mitsubishi Mighty Max Macro Cab?
The factory center bore (hub bore) for the 1993 Mitsubishi Mighty Max Macro Cab is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 1993 Mitsubishi Mighty Max Macro Cab?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 38-46mm, and a center bore of at least 67.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 1993 Mitsubishi Mighty Max Macro Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset