1992 Mitsubishi Mighty Max Macro Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Mitsubishi Mighty Max Macro Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1992 Mighty Max Macro Cab — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Mitsubishi Mighty Max Macro Cab's 5x114.3 bolt pattern era, which continued through 1994 (3 consecutive years). Wheels from any 1992–1994 Mitsubishi Mighty Max Macro Cab are cross-compatible with the 1992 model.
Mitsubishi Mighty Max Macro Cab Bolt Pattern by Year
The table below shows how the Mighty Max Macro Cab's wheel specifications have changed over the years. The 1992 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1992 Mitsubishi Mighty Max Macro Cab
For your 1992 Mitsubishi Mighty Max Macro Cab, the 5x114.3 bolt pattern is shared with 1992-1994 models. The 67.1mm center bore is critical; aftermarket wheels with larger bores require hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 38-46mm to avoid rubbing or clearance issues. Always use 12x1.5 lug nuts with the correct seat type (cone or ball) matching the wheel; mismatched seats can cause wheel loosening. Re-torque after 50-100 miles. Verify wheel weight capacity exceeds vehicle GVWR.
Historical Fitment Data Reference
In our dataset, Mitsubishi Mighty Max Macro Cab appears from 1992 to 1994 (3 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings for aftermarket wheels with a bore larger than 67.1mm to prevent vibration.
- ✅ Stick to offset between 38-46mm; lower offset may rub fenders, higher may contact suspension.
- ✅ Always use 12x1.5 lug nuts with matching seat (cone or ball) and re-torque to spec after 50-100 miles.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Mitsubishi Mighty Max Macro Cab — Frequently Asked Questions
What is the bolt pattern for a 1992 Mitsubishi Mighty Max Macro Cab?
The 1992 Mitsubishi Mighty Max Macro Cab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Mighty Max Macro Cab have the same bolt pattern as the 1992?
The Mitsubishi Mighty Max Macro Cab uses the 5x114.3 pattern from 1992 through 1994. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
What is the PCD for a 1992 Mitsubishi Mighty Max Macro Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1992 Mighty Max Macro Cab, the PCD is 5x114.3.
Can I use spacers on my 1992 Mitsubishi Mighty Max Macro Cab?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Can I put aftermarket wheels on my 1992 Mitsubishi Mighty Max Macro Cab?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 38-46mm, and a center bore of at least 67.1mm (using hub rings if larger).
What lug nut size does the 1992 Mitsubishi Mighty Max Macro Cab use?
The 1992 Mitsubishi Mighty Max Macro Cab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset