1994 Mitsubishi Mighty Max Macro Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Mitsubishi Mighty Max Macro Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 38-46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1994 Mighty Max Macro Cab — Year-Specific Fitment Context
The 1994 model year is the final year of the Mitsubishi Mighty Max Macro Cab's 5x114.3 bolt pattern run (since 1992). Wheels from any 1992–1994 Mitsubishi Mighty Max Macro Cab are cross-compatible with the 1994 model.
Mitsubishi Mighty Max Macro Cab Bolt Pattern by Year
The table below shows how the Mighty Max Macro Cab's wheel specifications have changed over the years. The 1994 model year is highlighted.
Fitment Notes
The 1994 Mitsubishi Mighty Max Macro Cab has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Mitsubishi Mighty Max Macro Cab appears from 1992 to 1994 (3 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 84.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
1994 Mitsubishi Mighty Max Macro Cab — Frequently Asked Questions
What is the bolt pattern for a 1994 Mitsubishi Mighty Max Macro Cab?
The 1994 Mitsubishi Mighty Max Macro Cab uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 38-46mm.
What other years of Mitsubishi Mighty Max Macro Cab have the same bolt pattern as the 1994?
The Mitsubishi Mighty Max Macro Cab uses the 5x114.3 pattern from 1992 through 1994. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1994 Mitsubishi Mighty Max Macro Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 1994 Mitsubishi Mighty Max Macro Cab?
The OEM offset for the 1994 Mighty Max Macro Cab is typically around 38-46mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 1994 Mitsubishi Mighty Max Macro Cab?
The factory center bore (hub bore) for the 1994 Mitsubishi Mighty Max Macro Cab is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 1994 Mitsubishi Mighty Max Macro Cab use?
The 1994 Mitsubishi Mighty Max Macro Cab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Mitsubishi Mighty Max Macro Cab is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1994 (3 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 84.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1994 Mitsubishi Mighty Max Macro Cab, please report it via our About page contact so we can verify and update this record.