2006 Mitsubishi Raider Extended Cab Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Mitsubishi Raider Extended Cab, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 4x100
Lug Nut / Bolt Size N 12x1.50
Center Bore (CB) 56.1 mm
Offset (ET) 35
Torque Specs 80 ft-lbs (108 Nm)

2006 Raider Extended Cab — Year-Specific Fitment Context

The 2006 model year marks the beginning of the Mitsubishi Raider Extended Cab's 4x100 bolt pattern era, which continued through 2009 (4 consecutive years). Wheels from any 2006–2009 Mitsubishi Raider Extended Cab are cross-compatible with the 2006 model.

Mitsubishi Raider Extended Cab Bolt Pattern by Year

The table below shows how the Raider Extended Cab's wheel specifications have changed over the years. The 2006 model year is highlighted.

Year Bolt Pattern Center Bore Offset
▸ 2006 4x100 56.1 35
2007 4x100 56.1 35
2008 4x100 56.1 35
2009 4x100 56.1 35

Fitment Notes

The 2006 Mitsubishi Raider Extended Cab has a bolt pattern of 4x100.

This means it is a 4 lug pattern with a circle diameter of 100mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Mitsubishi Raider Extended Cab appears from 2006 to 2009 (4 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

4x100 Pattern Context

This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.

Examples of other vehicles using 4x100:

2006 Mitsubishi Raider Extended Cab — Frequently Asked Questions

What is the bolt pattern for a 2006 Mitsubishi Raider Extended Cab?

The 2006 Mitsubishi Raider Extended Cab uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 35mm.

What other years of Mitsubishi Raider Extended Cab have the same bolt pattern as the 2006?

The Mitsubishi Raider Extended Cab uses the 4x100 pattern from 2006 through 2009. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.

Will wheels from another Mitsubishi fit my 2006 Raider Extended Cab?

Only if they share the exact same 4x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 56.1mm.

Can I put aftermarket wheels on my 2006 Mitsubishi Raider Extended Cab?

Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 35mm, and a center bore of at least 56.1mm (using hub rings if larger).

What lug nut size does the 2006 Mitsubishi Raider Extended Cab use?

The 2006 Mitsubishi Raider Extended Cab uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

Why is matching the 56.1mm center bore important for the 2006 Raider Extended Cab?

The 56.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Mitsubishi Raider Extended Cab is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2006 Mitsubishi Raider Extended Cab, please report it via our About page contact so we can verify and update this record.

Mitsubishi Raider Extended Cab By Year

2006 2007 2008 2009

Other Mitsubishi Models

3000GT Diamante Eclipse Cross Endeavor Expo Galant Lancer Lancer Evolution Mighty Max Macro Cab Mighty Max Regular Cab Mirage Mirage G4 Montero Montero Sport Outlander Outlander PHEV Precis Raider Double Cab Raider Extended Cab i-MiEV