2007 Mitsubishi Raider Extended Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Mitsubishi Raider Extended Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 Raider Extended Cab — Year-Specific Fitment Context
The 2007 Mitsubishi Raider Extended Cab is in year 2 of 4 using the 4x100 pattern (2006–2009). Wheels from any 2006–2009 Mitsubishi Raider Extended Cab are cross-compatible with the 2007 model.
Mitsubishi Raider Extended Cab Bolt Pattern by Year
The table below shows how the Raider Extended Cab's wheel specifications have changed over the years. The 2007 model year is highlighted.
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2007 Mitsubishi Raider Extended Cab
For your 2007 Mitsubishi Raider Extended Cab, the 4x100 bolt pattern and 56.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is sensitive: stick to 35mm ±5mm to avoid rubbing or poor handling. Use only lug nuts with 12x1.50 thread pitch and correct seat type (conical 60° for most aftermarket wheels; ball seat for OEM). Incorrect lug nuts can cause wheel loss. Always torque to manufacturer specs and re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Mitsubishi Raider Extended Cab appears from 2006 to 2009 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Verify wheel bore diameter; use hub-centric rings if aftermarket bore exceeds 56.1mm.
- ✅ Avoid wheels with offset below 30mm or above 40mm to prevent clearance issues with suspension and fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Mitsubishi Raider Extended Cab — Frequently Asked Questions
What is the bolt pattern for a 2007 Mitsubishi Raider Extended Cab?
The 2007 Mitsubishi Raider Extended Cab uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 35mm.
What other years of Mitsubishi Raider Extended Cab have the same bolt pattern as the 2007?
The Mitsubishi Raider Extended Cab uses the 4x100 pattern from 2006 through 2009. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2007 Mitsubishi Raider Extended Cab?
Absolutely. Just ensure the aftermarket wheels have a 4x100 bolt pattern, an offset near 35mm, and a center bore of at least 56.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2007 Mitsubishi?
The 2007 Raider Extended Cab uses a 4x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What lug nut size does the 2007 Mitsubishi Raider Extended Cab use?
The 2007 Mitsubishi Raider Extended Cab uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2007 Mitsubishi Raider Extended Cab?
The OEM offset for the 2007 Raider Extended Cab is typically around 35mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset