2008 Mitsubishi Raider Extended Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Mitsubishi Raider Extended Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 56.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2008 Raider Extended Cab — Year-Specific Fitment Context
The 2008 Mitsubishi Raider Extended Cab is in year 3 of 4 using the 4x100 pattern (2006–2009). Wheels from any 2006–2009 Mitsubishi Raider Extended Cab are cross-compatible with the 2008 model.
Mitsubishi Raider Extended Cab Bolt Pattern by Year
The table below shows how the Raider Extended Cab's wheel specifications have changed over the years. The 2008 model year is highlighted.
4x100 Pattern Context
This bolt pattern appears on 461 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 2008 Mitsubishi Raider Extended Cab
For the 2008 Mitsubishi Raider Extended Cab, the 4x100 bolt pattern and 56.1mm center bore are critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is sensitive: the factory 35mm offset maintains proper suspension geometry and brake clearance. Deviating more than ±5mm may cause rubbing or handling issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (cone or ball seat, matching the wheel). Improper lug nuts can lead to wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Mitsubishi Raider Extended Cab appears from 2006 to 2009 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ Verify aftermarket wheels include hub-centric rings for the 56.1mm bore; otherwise, vibrations may occur.
- ✅ Check that the wheel's offset is within 30-40mm to avoid rubbing on suspension or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Mitsubishi Raider Extended Cab — Frequently Asked Questions
What is the bolt pattern for a 2008 Mitsubishi Raider Extended Cab?
The 2008 Mitsubishi Raider Extended Cab uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 56.1mm and the offset is 35mm.
What other years of Mitsubishi Raider Extended Cab have the same bolt pattern as the 2008?
The Mitsubishi Raider Extended Cab uses the 4x100 pattern from 2006 through 2009. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the PCD for a 2008 Mitsubishi Raider Extended Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 Raider Extended Cab, the PCD is 4x100.
How tight should I torque the lug nuts on a 2008 Mitsubishi Raider Extended Cab?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2008 Mitsubishi Raider Extended Cab use?
The 2008 Mitsubishi Raider Extended Cab uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2008 Mitsubishi Raider Extended Cab?
The factory center bore (hub bore) for the 2008 Mitsubishi Raider Extended Cab is 56.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset