2019 Nissan Altima Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Nissan Altima, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 Altima — Year-Specific Fitment Context
The 2019 Nissan Altima is in year 27 of 32 using the 5x114.3 pattern (1993–2024). Wheels from any 1993–2024 Nissan Altima are cross-compatible with the 2019 model.
Nissan Altima Bolt Pattern by Year
The table below shows how the Altima's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1993 | 5x114.3 | 66.1 | 35-45 |
| 1994 | 5x114.3 | 66.1 | 35-45 |
| 1995 | 5x114.3 | 66.1 | 35-45 |
| 1996 | 5x114.3 | 66.1 | 35-45 |
| 1997 | 5x114.3 | 66.1 | 35-45 |
| 1998 | 5x114.3 | 66.1 | 35-45 |
| 1999 | 5x114.3 | 66.1 | 35-45 |
| 2000 | 5x114.3 | 66.1 | 40 |
| 2001 | 5x114.3 | 66.1 | 40 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2003 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2010 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 40 |
| 2012 | 5x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| ▸ 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 Nissan Altima
For the 2019 Nissan Altima, the 5x114.3 bolt pattern is shared across 1993–2024 models, but center bore and offset are critical. The factory center bore is 66.1mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset should stay within 35–45mm to avoid rubbing or clearance issues; the stock offset is 40mm. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—factory wheels use a conical (60-degree) seat. Using incorrect lug nuts can cause wheel detachment. Verify that aftermarket wheels clear brake calipers and suspension components. Re-torque after 50–100 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan Altima appears from 1993 to 2024 (32 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lb after 50–100 miles of driving to account for settling.
- ✅ Avoid wheels with offset below 35mm; they may rub on the strut or fender.
- ✅ If using aftermarket wheels, always install hub-centric rings (66.1mm ID to wheel bore OD) to prevent vibrations.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Nissan Altima — Frequently Asked Questions
What is the bolt pattern for a 2019 Nissan Altima?
The 2019 Nissan Altima uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan Altima have the same bolt pattern as the 2019?
The Nissan Altima uses the 5x114.3 pattern from 1993 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What is the center bore of a 2019 Nissan Altima?
The factory center bore (hub bore) for the 2019 Nissan Altima is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2019 Nissan Altima?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 Altima, the PCD is 5x114.3.
Will wheels from another Nissan fit my 2019 Altima?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
What is the factory wheel offset for a 2019 Nissan Altima?
The OEM offset for the 2019 Altima is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset