2014 Nissan Altima Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2014 Nissan Altima is 5x114.3 (5x4.5"). It has a center bore of 66.1 mm, an offset range of 40, and utilizes 12x1.25 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2014 Nissan Altima Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 40 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2014 Altima — Year-Specific Fitment Context
The 2014 Nissan Altima is in year 16 of 27 using the 5x114.3 pattern (1999–2025). Wheels from any 1999–2025 Nissan Altima are cross-compatible with the 2014 model. Across its full production run (1993–2025), the Altima has also used: 4x114.3.
Nissan Altima Bolt Pattern by Year
The table below shows how the Altima's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1993 | 4x114.3 | 66.1 | 35-45 |
| 1994 | 4x114.3 | 66.1 | 35-45 |
| 1995 | 4x114.3 | 66.1 | 35-45 |
| 1996 | 4x114.3 | 66.1 | 35-45 |
| 1997 | 4x114.3 | 66.1 | 35-45 |
| 1998 | 4x114.3 | 66.1 | 35-45 |
| 1999 | 5x114.3 | 66.1 | 35-45 |
| 2000 | 5x114.3 | 66.1 | 40 |
| 2001 | 5x114.3 | 66.1 | 40 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2003 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2010 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 40 |
| 2012 | 5x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
| ▸ 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
| 2025 | 5x114.3 | 66.1 | 40-45 |
2014 Nissan Altima Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3165 vehicles in our database (very common). For safe wheel swaps on the 2014 Nissan Altima, donor rims must match the 5x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2013 Hyundai Santa Fe | 66.1 mm (Exact) | 41 | N 12x1.50 (Cone) |
| 2008 INFINITI EX | 66.1 mm (Exact) | 40 | N 12x1.25 (Cone) |
| 2003 INFINITI FX | 66.1 mm (Exact) | 35 | N 12x1.25 (Cone) |
| 1992 INFINITI G | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 1996 INFINITI I | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
| 1993 INFINITI J | 66.1 mm (Exact) | 40-50 | 12x1.25 (Cone) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2021 Hyundai Santa Fe Hybrid | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2022 Hyundai Santa Fe Plug-in Hybrid | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2013 Hyundai Santa Fe Sport | 67.1 mm | 67.1mm → 66.1mm |
41 |
| 2019 Hyundai Santa Fe XL | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 1992 Hyundai Scoupe | 67.1 mm | 67.1mm → 66.1mm |
35-50 |
| 2006 Hyundai Sonata | 67.1 mm | 67.1mm → 66.1mm |
46 |
Expert Buying Guide for 2014 Nissan Altima
For your 2014 Nissan Altima, the bolt pattern is 5x114.3mm, center bore 66.1mm, and recommended offset around 40mm. When selecting aftermarket wheels, ensure the center bore matches exactly or use hub-centric rings to prevent vibrations. Offset deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (conical/60-degree) to avoid wheel loosening. Improper lug nut seating can lead to dangerous failures. Verify that aftermarket wheels are load-rated for your vehicle's weight. For optimal safety, consult a professional fitment specialist.
Historical Fitment Data Reference
In our dataset, Nissan Altima appears from 1993 to 2025 (33 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ Check brake caliper clearance when using wheels with lower offset or larger diameter.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
2014 Nissan Altima — Frequently Asked Questions
What is the bolt pattern for a 2014 Nissan Altima?
The 2014 Nissan Altima uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan Altima have the same bolt pattern as the 2014?
The Nissan Altima uses the 5x114.3 pattern from 1999 through 2025. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2014 Nissan Altima?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 66.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2014 Nissan Altima?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2014 Nissan Altima?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
How do I measure the bolt pattern on my 2014 Nissan?
The 2014 Altima uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →