2010 Nissan Altima Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Nissan Altima, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2010 Altima — Year-Specific Fitment Context
The 2010 Nissan Altima is in year 18 of 32 using the 5x114.3 pattern (1993–2024). Wheels from any 1993–2024 Nissan Altima are cross-compatible with the 2010 model.
Nissan Altima Bolt Pattern by Year
The table below shows how the Altima's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1993 | 5x114.3 | 66.1 | 35-45 |
| 1994 | 5x114.3 | 66.1 | 35-45 |
| 1995 | 5x114.3 | 66.1 | 35-45 |
| 1996 | 5x114.3 | 66.1 | 35-45 |
| 1997 | 5x114.3 | 66.1 | 35-45 |
| 1998 | 5x114.3 | 66.1 | 35-45 |
| 1999 | 5x114.3 | 66.1 | 35-45 |
| 2000 | 5x114.3 | 66.1 | 40 |
| 2001 | 5x114.3 | 66.1 | 40 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2003 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| ▸ 2010 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 40 |
| 2012 | 5x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2010 Nissan Altima
For your 2010 Nissan Altima, the 5x114.3 bolt pattern is shared across many models, but critical dimensions must match. The center bore is 66.1mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: the factory range is around 40mm. Deviating more than ±5mm can cause rubbing or bearing stress. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (conical 60-degree for most aftermarket wheels). Mixing seat types (e.g., ball seat with conical) leads to loose wheels. Verify lug nut engagement—at least 6-8 full turns—and torque to 80-90 ft-lbs. Safety first: improper fitment compromises handling and can cause wheel detachment.
Historical Fitment Data Reference
In our dataset, Nissan Altima appears from 1993 to 2024 (32 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to account for settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibrations and stress on studs.
- ✅ Check inner clearance for aftermarket wheels; the 2010 Altima has limited space near the strut and fender liner.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Nissan Altima — Frequently Asked Questions
What is the bolt pattern for a 2010 Nissan Altima?
The 2010 Nissan Altima uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan Altima have the same bolt pattern as the 2010?
The Nissan Altima uses the 5x114.3 pattern from 1993 through 2024. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
Do 2010 Nissan Altimas use lug bolts or lug nuts?
The 2010 Altima requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2010 Nissan Altima?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 66.1mm (using hub rings if larger).
What is the PCD for a 2010 Nissan Altima?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Altima, the PCD is 5x114.3.
What is the factory wheel offset for a 2010 Nissan Altima?
The OEM offset for the 2010 Altima is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset